7441 results found

1. [ID-4256546]Bug when setting an even number as the start page number in a new document.

   Bug when setting an even number for the start page number when creating a new document

   1. Version of Adobe InDesign
      CC2025 (ver. 20.0) JP

   2. Steps to reproduce the issues
      Set any even number for the start page number on the Create New Document screen.

   3. Expected result
      An even page number will be displayed in Current Page Number as set.

   4. Actual resul
      The value set in the New Document screen will not be reflected, and “Current Page Number” will display “1”.

   As shown in the attached figure, when “Current Page Number” is inserted into a new document with the starting page number set to an even number, the document starts with “1”.
   (As long as the number set in the new document creation screen is an even number, any value will not be reflected and will become “1”).

   This phenomenon can be recovered by temporarily setting a different value in “Number & Section Option”.
   However, for users who are not aware of this behavior, it is sure to cause great confusion.
   It can also cause significant time loss in finding a solution.
   We have not been able to verify whether this bug is specific to the Japanese version, but we recognize that it is a very serious bug.
   We sincerely hope that the development team will fix it as soon as possible.

   <Japanese Comment>
   新規ドキュメント作成で開始ページ番号に偶数番号を設定すると発生する不具合

   InDesignのバージョン
   CC2025 (ver.20.0) JP

   問題の再現手順
   新規ドキュメント作成画面で、開始ページ番号に任意の偶数を設定する。

   予想される結果
   「現在のページ番号」に、設定通りの偶数ページ番号が表示される。

   実際の結果
   新規ドキュメント画面で設定した値は反映されず、「現在のページ番号」に「1」が表示される。

   添付画像のように、開始ページ番号を偶数番号に設定した新規ドキュメントに、「現在のページ番号」を挿入すると「1」から開始されます。
   （新規ドキュメント作成画面で設定した番号が偶数である限り、いかなる値であっても反映されず「1」となる）

   この現象は「ページ番号とセクションの設定」で、一時的に別の値を設定すれば回復します。
   しかしこの挙動を認識していないユーザーにとって、大きな混乱を招く原因となることは間違いありません。
   また、解決策を見つけるために大きな時間のロスを生む可能性があります。
   この不具合は日本語版固有の問題なのかは検証できていませんが、非常に深刻なバグであると認識しています。
   開発チームには早急に改善していただくよう切に希望します。

   Bug when setting an even number for the start page number when creating a new document

   1. Version of Adobe InDesign
      CC2025 (ver. 20.0) JP

   2. Steps to reproduce the issues
      Set any even number for the start page number on the Create New Document screen.

   3. Expected result
      An even page number will be displayed in Current Page Number as set.

   4. Actual resul
      The value set in the New Document screen will not be reflected, and “Current Page Number” will display “1”.

   As shown in the attached figure, when “Current Page Number” is inserted into a new document with the starting page… more

   •  

   •  

   •  

   •  

   • 

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Document/Pages  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   Fix for this issue is now available in the latest InDesign Release version 20.1 (Build 20.1.0.71), available via Creative Cloud Desktop application.

   Please update your InDesign application to this latest version to get the fix.

   --

   Adobe InDesign team

2. [ID-4235479] InDesign 2023 (18.0) Screen not refreshing

   Half the time or more, page down/up and zoom do not refresh the screen. Attempting to select something just draws the rectangle around nothing. Finally through a variety of erratic body movements, thrashing and random gestures, ID wakes up. This is a huge step backward from v17. Productivity severely hampered.

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   16 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Closed: Fixed  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   The fix of the issue is now available in the latest InDesign 2026(v21.0.1.006). We recommend you upgrade to the latest version for the fix.

   If you are unable to see the update, go to the Creative Cloud application, click on the context menu on the top right, and click on Check for App Updates.

   —

   Adobe InDesign Team

3. Find Format and Change Format option unavailable in Find/Change-文字種変換

   Version : Adobe InDesign 2021(ver.16.0.1 ja_JP)
   OS : macOS10.15.6

   1.Steps to reproduce the issues
   1. Open Find/Change Window.
   2. Select "文字種変換" and click "Specify attributes to Find" and Select Style button.
   3. The selected Style does not shown in "Find Format" area and we can't apply it. However, click the button, we can see selected Style we selected previouse step.
   4. The Change Format in "文字種変換" also unavailable.

   2.Expected result
   The selected style is displayed correctly in Find Style area and is correctly apply.
   Also, the replacement style is set correctly in Change Style and replaced as well like InDesign 2021.

   1. Actual result We can't set Find Format and Change Format options in "文字種変換" in Find/Change window. Test file, screenshot, video or GIF capturing the issue (optional)

   Japanese.
   1.問題を再現する手順
   1.検索と置換ウィンドウを開きます。
   2.「文字種変換」を選択し、「検索形式」をクリックして、「検索する属性を指定」ボタンをクリックします。
   3.選択したスタイルが検索形式のエリアに表示されず、適用できません。ただし、再度「検索する属性を指定」ボタンをクリックすると、前の手順で選択したスタイルが表示されます。
   4.「置換形式」のスタイルも利用できません。

   2.期待される結果
   InDesign2021と同様に、選択したスタイルが「検索形式」エリアに正しく表示され、検索対象として正しく機能する。また、「置換形式」も同様に設定できて正しく置換が行える。

   3.実際の結果
   「検索と置換」ウィンドウの「文字種変換」で「フォーマットの検索」および「フォーマットの変更」オプションを設定することはできません。

   Please refer below,
   https://community.adobe.com/t5/indesignフォーラム/文字種変換で検索形式の指定ができません/m-p/11695809

   Version : Adobe InDesign 2021(ver.16.0.1 ja_JP)
   OS : macOS10.15.6

   1.Steps to reproduce the issues
   1. Open Find/Change Window.
   2. Select "文字種変換" and click "Specify attributes to Find" and Select Style button.
   3. The selected Style does not shown in "Find Format" area and we can't apply it. However, click the button, we can see selected Style we selected previouse step.
   4. The Change Format in "文字種変換" also unavailable.

   2.Expected result
   The selected style is displayed correctly in Find Style area and is correctly apply.
   Also, the replacement style is set correctly in Change Style and replaced as well like InDesign… more

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   The fix for this issue is available in the latest InDesign release 16.2.1
   Please update to this latest version to get the fix.

   —
   Adobe InDesign team

4. Share for Review: Image Quality

   Can we have an option where Share > Share for Review has a high-quality view as opposed to the low-res preview (see file attached- Review (left) and Original (right)) please?

   •  

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   5 comments  ·  Share for Review  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Resolved For User  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   Share for Review is to quickly share a design that is still a work-in-progress with the Reviewer(s) for quick feedback. Since the review opens in a browser for the reviewer, it has to load quickly even on slow networks, that’s why the image quality has been kept low deliberately so that the page loads quickly without long wait times. Using high-res views will slow down the loading of pages in the browser considerably, marring the experience.

   Hope this helps.

   —
   Adobe InDesign team

5. [ID-4218828]InDesign, InCopy: linked copy and image files randomly broken

   We are a group of 16 graphic designers working on Macs. Our OS are varied between Sierra, High Sierra and Mojave. We work in InDesign 14.03 and 15.02 (with linked InCopy assets), Bridge 9.1 and 10.03, Photoshop 20.0.8 and 21.1, and Illustrator 23.1.1 and 24.1. We work on Box Drive and store our layout files and absolute-linked image assets there. It is critical that we are able to work on each others’ files in a high-volume, high-production environment. We don’t believe this is an issue related to our connection speeds.

   Looking for a resolution to these issues:

   InDesign: Not all image and InCopy files are automatically updating / relinking to original assets on Box. This occurs when both original and different users open the InDesign file to edit it.

   Box Drive: Writers cannot always see ICML and Assignments files on Box Drive (in the Finder) after an Art Director has exported them for the writer to work on. This typically occurs shortly after exporting the assets.

   Bridge: time to load image previews can take up to 15 minutes for some designers.

   We are a group of 16 graphic designers working on Macs. Our OS are varied between Sierra, High Sierra and Mojave. We work in InDesign 14.03 and 15.02 (with linked InCopy assets), Bridge 9.1 and 10.03, Photoshop 20.0.8 and 21.1, and Illustrator 23.1.1 and 24.1. We work on Box Drive and store our layout files and absolute-linked image assets there. It is critical that we are able to work on each others’ files in a high-volume, high-production environment. We don’t believe this is an issue related to our connection speeds.

   Looking for a resolution to these issues:

   InDesign: Not all… more

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   2 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Under Review  ·  amaarora responded

   Thanks for reporting. We will review it

   -InDesign Team

6. ID 2020 - Indent in combination with wrap text around an image not working

   In Indesign 2020, whenever I want to wrap text next to an image, but the text also has an indent the text jumps from the supposed position.
   In Indesign 2019 this did not happen. The text was wrapped nicely next to the image, the way you should expect.

   My guess what happens here, is that the indent specs are applied not the the edge of the frame, but to the edge of the text. Which corrupts the spacing between the image and the text.

   I'm working with the latest 2020 version on iMac with Catalina

   •  

   •  

   •  

   •  

   •  

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   25 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   This issue is addressed with a new option "Honor Text Indents in addition to Text Wrap" in Preferences > Composition dialog. This option is ON for new docs created in ID2023 and needs to be turned ON for docs created in older versions of InDesign when opened in ID2023.

   --

   Adobe InDesign team

7. Please change one word in the German Indesign

   The German Word "Abstände" is used two times in the paragraph style panel but with two completely different meanings.

   First use "Einzüge und Abstände" is in English "Indents and Spacing".

   Second use "Abstände" is in English "Justification".

   Please change the second one to "Blocksatz" or "Blocksatzeinstellungen" so that the German users will not be confused anymore.

   Or contact a German speaking InDesign pro user for a better translation.

   Just a small change to make a lot of (German speaking) people happy!

   •  

   •  

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   7 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  Abhinav Kaushik responded

   Hello All,
   Thank you for reporting the issue to us.
   We have fixed the issue in the latest version of InDesign, Id 15.0

   Please upgrade your InDesign application to the latest version to try out the fix.

   If you face any problems with the new update, do let us know in the comments.

   You may also follow the below given link for the list of all fixed issues in Id 15.0
   https://helpx.adobe.com/indesign/kb/fixed-issues.html

   -InDesign Team

8. InDesign makes incorrect QR code words and we can't decode QR codes correctly.

   Steps to Reproduce:
   1. Object->Make QR Code...
   2. Input strings "問題は日本語を正常に扱えるかどうか。".
   3. Result QR Code is incorrect.

   Actual Result:
   Sometimes, we got the wrong code in Japanese locale.

   Any Workarounds:
   Here is Japanese character strings "問題は日本語を正常に扱えるかどうか。".
   This was coded into the InDesign try and get "image1.png".
   Then, we try to decode it at ZXING decoder. Here is a decoded result (image2.png)

   42 1e 59 58 fe 9a 18 ce 38 1a fe 69 7a 5e 69 ca
   ce 8a a9 ee 38 29 2e 6a da 3e 5b 8b 8e 38 1a be
   68 9b 1 8 0a ce 09 78 c2 17 9c 14 11 81 a7 38 24
   63 02 5e 70 10 06 08 00 ec 11 ec 11 ec 11 ec 11

   The top has been encoded in the beginning have you because of 8-bit byte mode from the head with a "0x4". Then, the character codes are used here is UTF-8. Until "... 正常に扱" it has been encoded successfully. But it can not be decoded completely normal the next "え"(12th character) or later.
   In fact, this string is a mode change in a 35 byte. And, now, the used is "0x8" So KANJI Mode. Subsequent bytes will be the number of characters. "0xa" So 10 characters. And compressed into one character 13bit in this mode. Actual rest of the string is "えるかどうか。" 7 is the letter does not match the number of fundamental places because. The code itself will be inferred from the simple result of decoding.A byte sequence that has been obtained is decoded as SJIS but UTF-8 has over encoded as it is. The character code must perform the encoding by converting to SJIS from KANJI Mode. 7 is why this in a letter 21 bytes because it is each of the three-byte count of and 10 characters to compress the two-byte set to 13bit come out.
   A decoder is handled by SJIS because of KANJI Mode. So characters are garbled.

   KANJI Mode makes incorrect code words in InDesign and why mode change in a 35 byte?
   In case of "問題は日本語を正常に扱えるかどうか。" all characters are non-Ascii code range and all characters in SJIS code range. It must be encoded KANJI Mode if using KANJI Mod.
   However, I think it is better to encode 8bit byte mode with UTF-8 all characters.

   Please reference below:

   81 28 31 32 a0 29 ae 3a 7f da 3a 82 e0 bb 35 96
   85 24 b6 a1 26 0b 48 4a 42 8e 12 40 94 80 08 00
   ec 11

   It is correct code words in KANJI Mode with "問題は日本語を正常に扱えるかどうか。"(image3.png/Made by QR Code Maker Pro in Adobe AddOns)
   And below codes encoded in 8bit byte mode with UTF-8

   43 6e 59 58 fe 9a 18 ce 38 1a fe 69 7a 5e 69 ca
   ce 8a a9 ee 38 29 2e 6a da 3e 5b 8b 8e 38 1a be
   68 9b 1e 38 18 8e 38 28 be 38 18 be 38 1a 9e 38
   18 6e 38 18 be 38 08 20 ec 11 ec 11 ec 11 ec 11
   ec 11 ec 11 ec 11 ec 11 ec 11 ec 11 ec 11 ec 11

   I recommend discarding KANJI MODE. I think all characters to be encoded 8bit byte mode with UTF-8 characters is the better way.

   To Adobe, Please check ID-4170816.

   Steps to Reproduce:
   1. Object->Make QR Code...
   2. Input strings "問題は日本語を正常に扱えるかどうか。".
   3. Result QR Code is incorrect.

   Actual Result:
   Sometimes, we got the wrong code in Japanese locale.

   Any Workarounds:
   Here is Japanese character strings "問題は日本語を正常に扱えるかどうか。".
   This was coded into the InDesign try and get "image1.png".
   Then, we try to decode it at ZXING decoder. Here is a decoded result (image2.png)

   42 1e 59 58 fe 9a 18 ce 38 1a fe 69 7a 5e 69 ca
   ce 8a a9 ee 38 29 2e 6a da 3e 5b 8b 8e 38 1a be
   68 9b 1 8 0a ce 09… more

   •  

   •  

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Closed: Fixed  ·  Abhinav Kaushik responded

   Hello All,

   Thank you for reporting the issue to us.
   We have fixed the issue in the latest version of InDesign, Id 14.0.3

   Please upgrade your InDesign application to the latest version to try out the fix.

   If you are unable to see the update yet, go to Creative Cloud desktop application, open the menu (three dots) from the top-right corner and click on ‘Check For App Updates’.

   If you face any problems with the new update, do let us know in the comments.

   You may also follow the below given link for the list of all fixed issues in Id 14.0.3
   https://helpx.adobe.com/indesign/kb/fixed-issues.html

9. InDesign crashes on launch with Faulty module "PMRuntime" unless launched as Administrator or Creative Cloud Application

   Issue: InDesign CC will not open from the Start Menu unless "Run as administrator" is selected. This is not an option for standard users.

   It will open OK from the Creative Cloud Desktop App.

   Event viewer log is generated showing the following:
   Faulting application name: InDesign.exe, version 13.1.0.76
   Faulting module name: PMRuntime.dll, version 5.0.0.191

   1.
   Version: InDesign CC 2018, 13.1.076
   Also occurs with version 12.1.0.56
   Windows OS: Windows 10, version 1803 (Build 17134.165)

   2.
   Select InDesign CC from the start menu. The application does not open and no messages appear. Check Event Viewer > Application to see the error.

   There appears to be an issue with security permissions or a compatibility issue with the latest Windows 10 build.

   Issue: InDesign CC will not open from the Start Menu unless "Run as administrator" is selected. This is not an option for standard users.

   It will open OK from the Creative Cloud Desktop App.

   Event viewer log is generated showing the following:
   Faulting application name: InDesign.exe, version 13.1.0.76
   Faulting module name: PMRuntime.dll, version 5.0.0.191

   1.
   Version: InDesign CC 2018, 13.1.076
   Also occurs with version 12.1.0.56
   Windows OS: Windows 10, version 1803 (Build 17134.165)

   2.
   Select InDesign CC from the start menu. The application does not open and no messages appear. Check Event Viewer > Application to see the error.

   There… more

   20 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   23 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   CLOSED  ·  Abhinav Kaushik responded

   Hello All,

   Thank you for patience while we were investigating into the root cause of the issue.
   During our investigation we identified that the issue manifests due to Symentec DLP antivirus software.

   Please find below steps to whitelist the application:
   1. From the Enforce console select System > Agents >Application Monitoring.
   2. Select the application to white list. If it is not listed, click on “add application” and provide at least one of the required application binaries.(Refer to Symentec DLP_Console.png for reference)
   Note: DLP attempts to validate every field populated. We recommend using as few as fields as needed. If the whitelist seems to fail, try changing which required field is populated or removing one of the other fields.
   3. Uncheck all of the detection channels under the “Application Monitoring Configuration.”
   4. Click on save and verify the application in the list of monitoring activities is unchecked.
   5. After making these changes, test the whitelisted application to see if the issue is resolved.

   Regards,
   InDesign Team

   Hello All,

   Thank you for patience while we were investigating into the root cause of the issue.
   During our investigation we identified that the issue manifests due to Symentec DLP antivirus software.

   Please find below steps to whitelist the application:
   1. From the Enforce console select System > Agents >Application Monitoring.
   2. Select the application to white list. If it is not listed, click on “add application” and provide at least one of the required application binaries.(Refer to Symentec DLP_Console.png for reference)
   Note: DLP attempts to validate every field populated. We recommend using as few as fields as needed. If the whitelist seems to fail, try changing which required field is populated or removing one of the other fields.
   3. Uncheck all of the detection channels under the “Application Monitoring Configuration.”
   4. Click on save and verify the application in the list of monitoring activities is unchecked.
   5. After making… more

10. mouse lag in indesign when photoshop window open

    Experiencing terrible mouse lag in indesign, the cursor flickers constantly and it feels like the mouse is swimming through mud. Nearly enough to make the program unusable. Reinstall fixes the problem temporarily but it returns within 30mins.

    I have identified that this only happens when a photoshop window is open behind or next to the indesign window.

    Indesign 13.1
    Photoshop 19.1.2
    Mac os sierra 10.12.6

    • 

    20 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    22 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    CLOSED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    We confirmed that the 60Hz version MODEL A2119 EMC 3279 works fine. The offending Apple dongle is MODEL A1621 EMC 2877 which is the obsolete model.

    Please upgrade the Apple dongle to overcome the issue.

    ---

    Adobe InDesign team

11. Rollover images "stick" in Interactive PDF

    Hi, I am working on the document that contains multiple rollovers. All of them "stick" at one point or another, the images will change to "rollover" state but not to the normal state when hovering off. This is very confusing for the end-users. Please see attached pdf. I am using InDesign CC 2018.

    • 

    20 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    8 comments  ·  PDF Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Closed: Different Product  ·  Abhinav Kaushik responded

    Thank you all for reporting the issue to us.
    We have concluded our investigation into the issue. As per our findings, the bug belongs to Acrobat and there is little that can be done at InDesign’s end.

    We have already notified the concerned team, internally and they would be working on the same.

    For now we are closing this thread for InDesign.

    -InDesign Team

12. Blank (Empty) panels in InDesign

    Effects panel is blank for the last month or two. Inconvenient.

    Indesign 2018, 13.0.1
    Mac OS 10.13.1

    •  

    •  

    •  

    •  

    • 

    •  

    •  

    20 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    16 comments  ·  Effects/Transparency  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    CLOSED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    This issue is no longer reproducible. If you are still facing this issue, you may try to quit the application, trash InDesign Cache and Preferences and check again.

    --

    Adobe InDesign team

13. Hyphenation settings see note references as a character

    Hypenation settings consider a note reference as a character, so if you have a footnote callout at the end of a word and hyphenation settings are set to "before last 3" it will make 2-letter hyphenation.

    •  

    19 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. Copy and Paste from Share for Review Comments panel not working

    You used to be able to copy/paste directly from the REVIEW panel COMMENT when you receive feedback. Now it won't allow you to copy what someone has reviewed and suggested as replacement text. This is very important as it makes it much more efficient to copy it from within InDesign rather than swapping between screens to do it from the browser. Please can you fix this! Thank you!

    19 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    11 comments  ·  Share for Review  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Closed: Fixed  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    This issue has got fixed in InDesign 2024 19.2 Release.

    --

    Adobe InDesign team

15. Hyperlink alt text is ignored in the latest version of Indesign

    When creating or editing a hyperlink there is an option to add alt text. If you add alt text to your link and export an accessible PDF the alt text is ignored. I have a document with a ton of hyperlinks that all need alt text which we have added but don't come through because of this bug. Now I'm forced to add them again to the PDF.

    •  

    19 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    5 comments  ·  PDF Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    CLOSED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    According to the ISO-32000, the Hyperlinks are NOT supposed to be populated into the Alt-Text field. They should be entered into the Contents Key (see attachment) instead.
    InDesign currently does place them in the correct place [see screenshot attached].
    While someone using Acrobat can also add them to the Alt-text field, this is technically less correct than entering into the Contents key but either will pass an Accessibility checker.

    InDesign implemented this correctly based on the above information (provided by Accessibility experts, like Dax Castro, thanks Dax).

    Closing this issue.

    —
    Adobe InDesign team

16. Opening Text Wrap panel crashes application

    1. Indesign 2021
    2. Place image, open text wrap panel, does not open panel and crashes.
       Happens with any image and any document. Panel opens fine if pic box empty.

    OsX Mojave.

    Gone back to 2020.

    •  

    19 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    37 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    The fix for this issue is now available in the latest update of InDesign – version 16.1
    Please update to this version to get the fix.

    —
    Adobe InDesign team

17. InDesign fails to create Share for Review link with the error message "There was an error creating the artifact."

    •  

    •  

    19 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    22 comments  ·  Share for Review  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    CLOSED  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    We completed the investigation and came up with the following: Either the issue has been resolved in the most recent release of InDesign (Refer to InDesign Release notes), the issue was intermittent at the time of reporting and is no longer reproducible, or the InDesign version mentioned in the report is no longer covered by Creative Cloud Support Policy.

    We would recommend you upgrade to the latest version as it is more robust. Refer to Share InDesign documents for review to easily share your InDesign documents with collaborators for feedback and review. If you are still facing this issue even after updating it Contact Adobe support.

    —

    Adobe InDesign Team

18. Error creating Review

    That I create a sharing link for review
    I get the following error.
    What could be the problem?
    Thanks

    •  

    •  

    •  

    •  

    19 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    15 comments  ·  Share for Review  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    This issue has been fixed in the latest release of InDesign 15.1.2

    Please update to this version to get the fix.

    —
    Adobe InDesign team

19. Style Override Highlighter not highlighted when in use

    When I make some style changes in my text, the "Style Override Highlighter" marks theses changes. Great feature, no problem at all.

    But when I 1) quit InDesign and 2) start it again, the changed text is highlighted but the "Style Override Highlighter" icon [+a] is highlighted not at all.

    Solution shortcurt: Click on [+a] in character style panel, then on [+a] in paragraph style panel and it should behave the way it should. But it would be better if it'd be working the way it should.

    German InDesign 2020, Mac OSX 10.14.16

    • 

    •  

    •  

    19 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    6 comments  ·  Styles  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Closed: Not Reproducible  ·  amaarora responded

    Hi,
    Since for most of issue the issue no longer occurs, or is resolved after cleaning InDesign cache and preferences, we are closing the issue

    Thanks

20. Links export to PDF creates "Null Alt Text" attribute in tagged PDF

    When an ID 15 file with hyperlinks is exported to Tagged PDF, unless you assign alternative text to the Links in ID, the Link tags will have a "null text" attribute which prevents the content of the Link tag from being read by a screen reader. This is a problem for several reasons. Not everyone chooses to add alternative text to hyperlinks. It's a UA, but not a WCAG 2 requirement. An automated accessibility checker like Acrobat's or even PAC is not going to flag this. Most people do not do a "Jaws check" of the PDF they are remediating and will never know that the links are not "reading."

    Also, if you have a Figure which is hyperlinked the proper structure for that in a 508 compliant PDF is to place the Figure tag inside the Link tag and assign alternative text to the Figure tag not the link tag. Now with the null text Link tags, THIS will produce a "nested link" error from the Acrobat Checker. The nested alternative text for the Figure will not be read. Unfortunately, many people attempting to make 508 PDFs are unaware of what "null alt text" is and will have a devil of a time trying to resolve the error.

    So, instead of making PDF remediation easier with this new feature in ID you have made things worse!

    Ideally if no alternative text is entered in Indesign there should be no Alt text attribute of any kind in the Link Tag in the PDF.

    I've attached several files so you can see what this looks like in the Tags panel, but to truly understand it you should try to "read" the attached PDF using a screen reader like Jaws or NVDA.

    When an ID 15 file with hyperlinks is exported to Tagged PDF, unless you assign alternative text to the Links in ID, the Link tags will have a "null text" attribute which prevents the content of the Link tag from being read by a screen reader. This is a problem for several reasons. Not everyone chooses to add alternative text to hyperlinks. It's a UA, but not a WCAG 2 requirement. An automated accessibility checker like Acrobat's or even PAC is not going to flag this. Most people do not do a "Jaws check" of the PDF they are remediating… more

    • 

    19 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  PDF Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    The fix for this issue is now available in the latest update of InDesign – that is, InDesign 15.0.2.

    Please update your InDesign application to get this fix.

    —
    Adobe InDesign team