7339 results found

1. InDesign CC 2018 stalls to a spinning beachball right after opening for a brief time

   On first opening InDesign in Sierra 10.2.4, after a couple of seconds of not taking any action, InDesign stalls briefly—about 3 to 4 seconds—not allowing any new action during that time. There is just a spinning beachball. I can postpone the beachball by immediately opening a menu; but after mousing away from the menu the beachball comes back. Not sure if it is trying to load something, but I currently don't have any extra extensions installed. I tried resetting preferences and removing all user install scripts, but it still did it. It's consistent every time I open the new version. I did not carry forward preferences from previous versions. My CC library is synced and not showing any connection issues. Not a major bug, sort of the equivalent of tripping over the same spot of carpet whenever you enter into a room.

   On first opening InDesign in Sierra 10.2.4, after a couple of seconds of not taking any action, InDesign stalls briefly—about 3 to 4 seconds—not allowing any new action during that time. There is just a spinning beachball. I can postpone the beachball by immediately opening a menu; but after mousing away from the menu the beachball comes back. Not sure if it is trying to load something, but I currently don't have any extra extensions installed. I tried resetting preferences and removing all user install scripts, but it still did it. It's consistent every time I open the new version.… more

   13 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   41 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   CLOSED  ·  Abhinav Kaushik responded

   Hello All,

   Thank you for reporting the issue and allowing us some time to complete our investigation into the issue.
   As the part of our investigation, we had reached out to many of you personally over email and we could come up with the below mentioned findings.

   1. For many of the users the issue got fixed after updating InDesign to a newer version.
   2. For the majority of the users the issue was intermittent and is no longer reproducible.
   3. We also found few cases where the performance issue was identified to be related to span columns, cross-references, third party plugin etc.

   Please note that we have created separate threads for these issues and we are now working towards resolving them.

   However, over the time this thread has become too generic to serve its purpose effectively. As per your feedback and the outcome of our investigation we have created multiple threads to address each of the root causes separately and effectively.
   If you are facing any slowness in InDesign or seeing any other performance issue, we request you vote for the relevant thread or create a new thread specifying the action/workflow which is slowing you down.
   We seek your support in our continuous effort to improve InDesign.

   -InDesign Team

   Hello All,

   Thank you for reporting the issue and allowing us some time to complete our investigation into the issue.
   As the part of our investigation, we had reached out to many of you personally over email and we could come up with the below mentioned findings.

   1. For many of the users the issue got fixed after updating InDesign to a newer version.
   2. For the majority of the users the issue was intermittent and is no longer reproducible.
   3. We also found few cases where the performance issue was identified to be related to span columns, cross-references, third party plugin etc.

   Please note that we have created separate threads for these issues and we are now working towards resolving them.

   However, over the time this thread has become too generic to serve its purpose effectively. As per your feedback and the outcome of our investigation we have created… more

2. Moving objects between layers using the layers panel doesn't always work

   I struggle with moving objects between different layers in an InDesign document by using the layers panel. Often it takes two or more attempts to move objects. I wonder if it's the tolerance of the buttons or if this is genuinely a bug.

   • 

   13 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   4 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Closed: Fixed  ·  Abhinav Kaushik responded

   Please update InDesign to the latest version, InDesign CC 2018 (13.0) for the resolution of the issue.

3. Hyphenation zone settings override discretionary hyphen exclusivity

   Adobe InDesign Hyphenation Bug Report

   Summary

   Conflict between discretionary hyphen behavior and "After First / Before Last" hyphenation zone settings, where InDesign ignores discretionary hyphens that fall within the prohibited hyphenation zone.

   Product Information

   • Product: Adobe InDesign
   • Component: Text Composition / Hyphenation Engine
   • Feature Area: Automatic Hyphenation and Discretionary Hyphens

   Problem Description

   Expected Behavior

   According to Adobe's documentation, discretionary hyphens should have absolute priority over automatic hyphenation rules. Specifically:

   "Entering a discretionary hyphen in a word does guarantee that the word can be broken only where the discretionary hyphen appears."

   When a word contains a discretionary hyphen that falls within the "After First X Letters" or "Before Last X Letters" prohibited zone, InDesign should:
   1. Respect the discretionary hyphen's exclusivity (only break where discretionary hyphen appears)
   2. Refuse to break the word at all since the only allowed break point falls within the prohibited zone
   3. Not apply automatic hyphenation anywhere else in the word

   Actual Behavior

   InDesign ignores the discretionary hyphen when it falls within the prohibited hyphenation zone and applies automatic hyphenation rules instead, breaking the word at algorithmically-determined positions that fall outside the prohibited zone.

   Conflicting Features

   Feature 1: Document Hyphenation Preferences

   • Location: Paragraph Panel Menu > Hyphenation Settings
   • Setting: "After First [X] Letters / Before Last [X] Letters"
   • Purpose: Defines minimum character zones at word beginnings/endings where hyphenation should not occur
   • Example: With "After First 3 Letters / Before Last 3 Letters", the word "aromatic" may hyphenate as "aro-matic" but not "ar-omatic" or "aromat-ic"

   Feature 2: Discretionary Hyphens

   • Location: Type > Insert Special Character > Hyphens And Dashes > Discretionary Hyphen
   • Keyboard Shortcut: Ctrl+Shift+- (Windows) or Command+Shift+- (macOS)
   • Purpose: Manually specify the only allowable break point in a word
   • Expected Behavior: Word can only break at the discretionary hyphen location, regardless of other settings

   Steps to Reproduce

   1. Create a new InDesign document
   2. Set up hyphenation preferences:
      • Go to Paragraph Panel Menu > Hyphenation Settings
      • Enable "Hyphenate"
      • Set "After First [3] Letters"
      • Set "Before Last [3] Letters"
   3. Create a text frame with justified text
   4. Insert a word where a discretionary hyphen would fall within the 3-letter prohibited zones
      • Example: Insert discretionary hyphen in "example" as "ex•ample" (where • represents the discretionary hyphen)
      • This discretionary hyphen falls in the "Before Last 3 Letters" zone
   5. Force line break to require hyphenation of this word

   Expected Result

   Word should not hyphenate at all, since the only allowed break point (discretionary hyphen) falls within the prohibited zone.

   Actual Result

   InDesign ignores the discretionary hyphen and hyphenates the word using automatic rules at a different location (e.g., "exam-ple").

   Impact

   Severity: Medium to High

   • Typography Quality: Undermines precise typographic control
   • Workflow Disruption: Manual intervention required to fix each occurrence
   • Consistency Issues: Unpredictable behavior between discretionary and automatic hyphenation
   • Professional Publishing: Affects quality of professional publications where precise hyphenation control is critical

   User Groups Affected

   • Professional typesetters and designers
   • Book and magazine publishers
   • Technical documentation teams
   • Any users requiring precise hyphenation control

   Technical Analysis

   Root Cause

   The hyphenation engine appears to process the "After/Before Letters" rules after or independently of discretionary hyphen evaluation, rather than respecting the documented hierarchy where discretionary hyphens should override all other hyphenation rules.

   Proposed Solution

   Modify the hyphenation algorithm to:
   1. First check for discretionary hyphens in the word
   2. If discretionary hyphen found: Evaluate if it falls within prohibited zones
   3. If in prohibited zone: Do not hyphenate the word at all
   4. If outside prohibited zone: Use only the discretionary hyphen break point
   5. Only if no discretionary hyphen: Apply automatic hyphenation rules with zone restrictions

   Workarounds

   Current Workarounds (Inefficient)

   1. Manual intervention: Individually edit each problematic word break inserting discretiona hyphen at start of word to prevent it from breaking.
   2. Character Style with No Break: Apply No Break character formatting to words with problematic discretionary hyphens
   3. Adjust zone settings: Reduce "After/Before Letters" values (compromises typography for other words)
   4. Remove discretionary hyphens: Use only automatic hyphenation (loses manual control)

   Limitation of Workarounds

   All workarounds require manual identification and correction of each instance, making them impractical for large documents or automated workflows.

   Documentation References

   Adobe InDesign Help: Text Composition

   • URL: https://helpx.adobe.com/indesign/using/text-composition.html
   • Relevant Quote: "Entering a discretionary hyphen in a word does guarantee that the word can be broken only where the discretionary hyphen appears."

   Hyphenation Settings Documentation

   • After First / Before Last Letters: "Specify the minimum number of characters at the beginning or end of a word that can be broken by a hyphen."

   Additional Information

   Related Features That Work Correctly

   • Discretionary hyphens function properly when they fall outside the prohibited zones
   • "After/Before Letters" settings work correctly with automatic hyphenation
   • No Break character formatting consistently prevents hyphenation

   Test Case Suggestions

   Adobe should test various combinations of:
   - Different "After/Before Letters" values (2, 3, 4, 5 characters)
   - Discretionary hyphens at different positions within words
   - Various word lengths and compositions
   - Different paragraph composers (Adobe Paragraph Composer vs. Single-line Composer)

   ---

   Request: Please prioritize this bug fix as it affects fundamental typographic control and contradicts documented behavior. The fix should ensure discretionary hyphens always take absolute precedence over automatic hyphenation rules, including zone restrictions.

   Adobe InDesign Hyphenation Bug Report

   Summary

   Conflict between discretionary hyphen behavior and "After First / Before Last" hyphenation zone settings, where InDesign ignores discretionary hyphens that fall within the prohibited hyphenation zone.

   Product Information

   • Product: Adobe InDesign
   • Component: Text Composition / Hyphenation Engine
   • Feature Area: Automatic Hyphenation and Discretionary Hyphens

   Problem Description

   Expected Behavior

   According to Adobe's documentation, discretionary hyphens should have absolute priority over automatic hyphenation rules. Specifically:

   "Entering a discretionary hyphen in a word does guarantee that the word can be broken only where the discretionary hyphen appears."

   When a word contains a discretionary hyphen… more

   12 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Overrides are not preserved when importing and overwriting object style

   version 19.3.0.58
   But it happens in everything after CC2018

   When I update object styles on import or book sync, size and position options do not retain overrides. What is currently known is Width, Height, X, Y in Size and Position Options.

   Reproduction steps

   1. Create a document
   2. Create object style
   3. Set Width, Height, X, Y of Size and Position Options as desired.
   4. Save document
   5. Open the document that duplicated 4.
   6. Create an object and apply the object style from 2.
   7. Change to any position and size (override)
   8. Import and update the object style in 2. from the document in 1.
   9. The object in 7. does not retain its size and position and is returned to the style settings.

   Expected behavior
   8. As a result, the size and position will remain as they were before the style update.

   There was a similar post, but the content didn't exactly match, so I posted a new one.
   https://indesign.uservoice.com/forums/601180-adobe-indesign-bugs/suggestions/42713450-certain-overrides-on-objects-styles-do-not-hold-wh

   Hope for improvement.

   〈にほんご / Japanese〉
   バージョン 19.3.0.58
   しかしCC2018以降すべてで起こる

   インポーティングやブックの同期でオブジェクトスタイルを更新すると、サイズと位置のオプションはオーバーライドを保持しない。現在判明しているのはSize and Position Optionsの中のWidth, Height, X, Y

   再現手順

   1. ドキュメントを作成
   2. オブジェクトスタイルを作成
   3. Size and Position OptionsのWidth, Height, X, Yを任意に設定
   4. ドキュメントを保存
   5. 4. を複製したドキュメントを開く
   6. オブジェクトを作成、2. のオブジェクトスタイルを適用
   7. 任意の位置、サイズに変更（オーバーライドする）
   8. 1. のドキュメントから2. のオブジェクトスタイルをインポートして更新
   9. 7. のオブジェクトはサイズと位置を保持せず、スタイルの設定値に戻されてしまう

   期待される挙動
   8. の結果、サイズと位置はスタイル更新前の状態を保持すること

   類似した投稿はあったが、内容が完全に一致しないため新たにポストした。

   改善を希望しちゃう。

   version 19.3.0.58
   But it happens in everything after CC2018

   When I update object styles on import or book sync, size and position options do not retain overrides. What is currently known is Width, Height, X, Y in Size and Position Options.

   Reproduction steps

   1. Create a document
   2. Create object style
   3. Set Width, Height, X, Y of Size and Position Options as desired.
   4. Save document
   5. Open the document that duplicated 4.
   6. Create an object and apply the object style from 2.
   7. Change to any position and size (override)
   8. Import and update the object style in 2. from the document in 1.
   9. The… more
   12 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   2 comments  ·  Styles  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. BUG: Small Caps not applied correctly to Variable Text with World-ready Composer

   Using Adobe Indesign 19.3 on MacOS 14.4, Apple M1.

   Steps to reproduce:
   1. Make new document.
   2. Define a text variable "Test" with custom text "Handgloves".
   3. Insert variable in text frame.
   4. Set the composer for that paragraph to "World-ready..."
   5. Set the paragraph in Small Caps
   6. Try different fonts.

   Expected result: small caps.

   Actual Result: only first two characters are changed to small caps. Typing characters after the variable placeholder changes how many characters are changed to small caps. See attached video.

   Workaround is to change the paragraph to a non World-ready composer.

   Note: may be related to this bug.

   Using Adobe Indesign 19.3 on MacOS 14.4, Apple M1.

   Steps to reproduce:
   1. Make new document.
   2. Define a text variable "Test" with custom text "Handgloves".
   3. Insert variable in text frame.
   4. Set the composer for that paragraph to "World-ready..."
   5. Set the paragraph in Small Caps
   6. Try different fonts.

   Expected result: small caps.

   Actual Result: only first two characters are changed to small caps. Typing characters after the variable placeholder changes how many characters are changed to small caps. See attached video.

   Workaround is to change the paragraph to a non World-ready composer.

   Note: may be… more

   •  

   12 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   4 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Flashing screen on selecting text

   Adobe InDesign 2024

   When highlighting text with text tool or selecting multiple items with the selection tool and dragging with the mouse held down, the screen flashes rapidly between the document and plain white - this makes the ID document contents not visible on the screen so you can't actually see what you are doing - eg can't see what text is being highlighted

   Please fix asap - it is making ID virtually unusable!

   12 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   5 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. The link is set to "anyone with link can comment" but it's still requiring a password

   I have created a share for review link for others to comment on, however it's requiring them to log into an account even though it's set to "Anyone with the link can comment". This was not the case before, others could comment as a guest. Using InDesign 2024 v19.0.1

   12 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   4 comments  ·  Share for Review  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   The issue has been fixed. 

   Now the Share for Review links set to "Anyone with the link can comment" open in the browser without asking for an Adobe ID login & password.

   --

   Adobe InDesign team

8. update to v24

   For as long as I can remember, dating back to the early single-digit versions of Adobe products, it was advised to make separate backups of user settings that were often found in obscure directories on a user's own computer. I dared to trust Adobe this time around, hoping that the update to version 24 of InDesign and its option to delete old versions, would respect the user settings that I so painfully put together. FAIL. Adobe failed to maintain them and deleted them from existence. Adobe should be putting a disclaimer on their update process to prompt users of all levels to backup their user settings and provide a link to where these obscure files are normally found. The "gotcha" or "pie-in-the-face" is not appreciated.

   For as long as I can remember, dating back to the early single-digit versions of Adobe products, it was advised to make separate backups of user settings that were often found in obscure directories on a user's own computer. I dared to trust Adobe this time around, hoping that the update to version 24 of InDesign and its option to delete old versions, would respect the user settings that I so painfully put together. FAIL. Adobe failed to maintain them and deleted them from existence. Adobe should be putting a disclaimer on their update process to prompt users of all… more

   12 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Share for Review  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. Issues with epub quality on the new 2023 update

   I'm a book publisher. I downloaded the latest InDesign update last week. I created the files and saved them like in the previous software. However, the vendors are all rejecting the epub files stating they're not validating in their epub software. I had to go redownload the prior version of InDesign, and it works like a charm. The glitch seems to be in the new version of the InDesign software.

   •  

   12 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   6 comments  ·  ePub/HTML/Publish Online  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Closed: Fixed  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   Fix for this issue is now available in the latest release of InDesign 2023 - that is, InDesign 18.1 version.

   Please update to this version of InDesign to get the fix.

   --

   Adobe InDesign team

10. Co-Authoring

    Time to address the co-authoring issue, especially if you are pushing to the cloud.

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Cloud Documents (Beta)  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. Type on a Path Tool interrupter flow text

    When there is a story (on parent page) with some 'text on a path' above:

    You can't use 'Flow text automatically' to exist pages (by alt\opt+shift) - because it moves the text in the next stories TO THE PATH!

    Note: 'Smart text reflow' *to new pages works well

    • 

    •  

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. InDesign should apply variating substitutions from rclt

    Variable fonts may contain location-dependent substitutions, but the rvrn feature runs too early for many real-world substitutions. The solution in font-making land has been to use the rclt or rlig features instead, but at least the former is not supported by InDesign. This is a major headache for e.g. Arabic.

    Technical discussion about this at

    • https://github.com/googlefonts/ufo2ft/issues/590
    • https://github.com/fonttools/fonttools/issues/2050
    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    5 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. Menu bar gets stuck - Indesign on M1 Pro mac

    On a regular basis the pull down menus in Indesign will stop reacting properly: Clicking menu item will select the topic (screenshot 1), but not pull down the menu. A second click AND hold will pull down the menu, but all the sub-menus remain unavailable, they will not pull out. The issue is persisent: Restarting Indesign does not fix it once it starts occuring, but restarting the computer will fix it. The issue may be OS related, but it only occurs in Indesign, and only on my M1 Pro computer, not my older Intel mac.

    The issue usually occurs after Indesign crashes, something which unfortunately happens multiple times a day using Indesign on M1 Pro. Having to restart the computer multiple times a day has not happened to me since the days of OS 9. I am using a couple of plugins in Indesign, which may contribute to crashes, but I also have an Intel Mac with the same version of Indesign, and the same plugins, and am having no such issues there.

    Apple M1 Pro
    Indesign 17.1
    macOS 12.0.1 (21A559)

    On a regular basis the pull down menus in Indesign will stop reacting properly: Clicking menu item will select the topic (screenshot 1), but not pull down the menu. A second click AND hold will pull down the menu, but all the sub-menus remain unavailable, they will not pull out. The issue is persisent: Restarting Indesign does not fix it once it starts occuring, but restarting the computer will fix it. The issue may be OS related, but it only occurs in Indesign, and only on my M1 Pro computer, not my older Intel mac.

    The issue usually occurs after… more

    •  

    •  

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    15 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. Indesign 2022 (17.1.0.50) IDLK file does not lock

    This problem was recently flagged as resolved, but despite the newest InDesign and MacOS versions it is still possible for two users to open the same Indesign file. We are working on a network volume over SMB and it is possible for my colleague to open the same file I am working with. The *.idlk file was generated by the first user, but it is not recognized by the second Indesign user and sometimes subsequently just disappears.

    I also tried to reproduce this issue with Indesign 2020 but all worked just as expected.

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    4 comments  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. InDesign not displaying actual (print) size

    InDesign 2021 does not actually show you the printed size of the document.

    There are two potential (and faulty) options to achieve this currently:

    1. Set the zoom level to 100%: On various forums I've read that this should let you view the document at actual print size. A document that physically takes up 10x10cm on your screen, should print at 10x10cm.

    In effect, that doesn't happen and the 100% renders my document at a way larger size than what it's actual size. (I'm literally holding up a ruler against my screen, and a 10cm wide page is about 20cm wide on the screen).

    1. Go to view>view actual size: This one comes closer - the document (and thus objects in it) are rendered about 1.3 smaller than the real-actual dimensions they'll be printed at (as opposed to 2 times bigger in the previous method).

    Again, this doesn't actually work and I'm wondering what it's intended to do.

    My suggested solution:

    I'm using a 4k, 15.6" Dell monitor, and photoshop did this also. It even has a "printed size" in addition to "actual size", which also didn't render things in their correct size.

    After reading this article: https://www.photoshopessentials.com/essentials/print-size/
    I understood that photoshop assumes all screens are at 72dpi, and that causes the incorrect rendering. After "telling" photoshop my actual monitor dpi, which is 283 - it began rendering things correctly when choosing "view print size".

    I when to edit>preferences>units&increments, and tried setting the "points/inch" setting. It was at 72 at default, and I thought that setting it to 283 would solve the problem.

    When I tried doing so, a popup came up and said "the value must be between 60 and 80". So this obviously doesn't work. I'm wondering why this would be the case, as screens today have dpi's of way over 72 and 80.
    Maybe allowing entering higher dpi's will solve this problem?

    Anyway, if anyone knows a solution/idea on how to display print size, I'd love to hear it.

    Thanks,
    Alon

    InDesign 2021 does not actually show you the printed size of the document.

    There are two potential (and faulty) options to achieve this currently:

    1. Set the zoom level to 100%: On various forums I've read that this should let you view the document at actual print size. A document that physically takes up 10x10cm on your screen, should print at 10x10cm.

    In effect, that doesn't happen and the 100% renders my document at a way larger size than what it's actual size. (I'm literally holding up a ruler against my screen, and a 10cm wide page is about 20cm wide… more

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Under Review  ·  6 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. Missing Glyphs on PDF export in InDesign v17.0

    using the google font Signika, quotation marks and colons give me a missing glyph upon export to pdf. When using v16.4, this is not an issue.

    • 

    •  

    •  

    •  

    •  

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    8 comments  ·  PDF Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    The fix for this issue is now available in the latest update of InDesign - InDesign 17.1 available via CCD app.

    --

    Adobe InDesign team

17. Indesign M1 Beta expired

    The beta suddenly stopped working and won't allow med to access InDesign on the M1 machine, no update on the Creative cloud installer beta section, and removing and reinstalling the app doesn't solve it.

    Will there come a new beta update soon?

    •  

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    31 comments  ·  Apple Silicon Support  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Closed: Fixed  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    Fix for this was available in the previous release of InDesign – InDesign 2021. Please update to the latest update of InDesign 2021 or install the latest version of InDesign 2022 to get the fix.

    —
    Adobe InDesign team

18. BUG (since CS6!): Nonbreaking Space (^S) Issue with World-Ready-Composer

    Issue:
    When using the ›World-Ready Composer‹, the character ›Nonbreaking Space‹ (^S) behaves exactly like the character ›Nonbreaking Space (Fixed Width)‹ (^s); i.e.: in justified paragraphs, its width does not adjust (like regular spaces do), but it is fixed and unchanging.
    This only occurs with the ›Adobe World-Ready Composer‹ (both ›Paragraph‹ and ›Single-line‹) and not with the regular ›Adobe Composer‹ (neither ›Paragraph‹ nor ›Single-line‹).
    It is not related to the font used, it has been tested with many different fonts.

    1. Versions with this bug, tested and confirmed by myself or colleagues:
       InDesign (Standard Version) CS6, CC2015.0
       InDesign (Middle Eastern Version) CC2020 (15.1.2), CC2021 (16.0)
       I suppose it occurs in all versions since CS6 (when the ›World-Ready Composer‹ was first introduced, afaik)!

    2. Steps to reproduce this issue
       Enter a few lines of text and insert the character ›Nonbreaking Space‹ somewhere. Choose any of the ›Justify‹ paragraph styles and select the ›World-Ready Composer‹. Switch to the regular ›Adobe Composer‹ with the same setup and compare the result.

    3. Expected Result:
       The ›Nonbreaking Space‹ should adjust its width just like any other of the regular spaces.

    4. Actual Result:
       The ›Nonbreaking Space‹ does not adjust its width.

    5. Example as Screenshot attached.
       (Menu is in German: ›Globaler Adobe-Absatzsetzer‹ = ›Adobe World-Ready Composer‹; ›Adobe-Absatzsetzer‹ = ›Adobe Composer‹)

    As far as I know, this issue has been reported only once before (https://indesign.uservoice.com/forums/601180-adobe-indesign-bugs/suggestions/39403822-non-breaking-space-is-smaller-than-regular-space-w). But in this report, it is stated incorrectly that the Nonbreaking Space would be smaller than a regular space. It can, in fact, be larger as well (e.g. in a tight line with regular spaces smaller than their 100% optimum). The real nature of the issue is that it does not vary its size.

    PLEASE FIX ASAP!
    Thanks

    Issue:
    When using the ›World-Ready Composer‹, the character ›Nonbreaking Space‹ (^S) behaves exactly like the character ›Nonbreaking Space (Fixed Width)‹ (^s); i.e.: in justified paragraphs, its width does not adjust (like regular spaces do), but it is fixed and unchanging.
    This only occurs with the ›Adobe World-Ready Composer‹ (both ›Paragraph‹ and ›Single-line‹) and not with the regular ›Adobe Composer‹ (neither ›Paragraph‹ nor ›Single-line‹).
    It is not related to the font used, it has been tested with many different fonts.

    1. Versions with this bug, tested and confirmed by myself or colleagues:
       InDesign (Standard Version) CS6, CC2015.0
       InDesign (Middle Eastern Version)… more

    •  

    •  

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under Review  ·  amaarora responded

    Thanks for reporting. We will review the issue

    -InDesign Team

19. Table graphic cell header disappear when exporting to pdf

    InDesign 2015-2021

    https://community.adobe.com/t5/indesign/table-header-disappear-when-exporting-to-pdf/td-p/10615207?page=1

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  PDF Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. Drop shadow in exported PDF is a different size

    Certain drop shadows have a different size when they appear in an exported PDF.

    In the attached example, the black shapes each have a drop shadow effect in yellow. When exported, the shadows appear shorter and narrower. The difference is approximately 20 pt narrower and 1 pt shorter. (Note the difference in proportion of the yellow drop shadow and black shape in the screenshots.) I've also included the drop shadow effect attributes.

    This occurs with multiple PDF export settings including the default [High Quality Print]. I am able to reproduce this behavior in both InDesign versions 15.1.2 and 16.0.

    •  

    •  

    •  

    12 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  PDF Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under Review  ·  amaarora responded

    Thanks for reporting. We will review the issue shortly.

    -InDesign Team