7605 results found

1. Slow Performance issue in the InDesign application

   Very Slow Performance

   Yes, InDesign is extremely slow today 2020-06-19, almost unusable, even many months after being discovered.
   The most worrying is that it seems that this bug was discovered in September 2019.

   As David wrote 2019-09-04: “Almost every action from selecting objects, resizing objects, or moving objects comes with a really slow reaction time”.

   Behaviour:

   InDesign freezes, and my cursor starts spinning around (CPU jumps to 95-98%) for almost 30-45 seconds before I can continue with next command.
   The behaviour is random, but when it starts working slow, then it continues. It usually happens when I open two InDesign documents at the same time (small documents).

   I run InDesign 15.1 x64 from Creative Cloud, and Windows 10 Enterprise with 16GB RAM.

   I hope Adobe fixes this very soon, as I cannot perform my daily work and my employer starts asking what is wrong with my deliveries.

   Manuel

   Very Slow Performance

   Yes, InDesign is extremely slow today 2020-06-19, almost unusable, even many months after being discovered.
   The most worrying is that it seems that this bug was discovered in September 2019.

   As David wrote 2019-09-04: “Almost every action from selecting objects, resizing objects, or moving objects comes with a really slow reaction time”.

   Behaviour:

   InDesign freezes, and my cursor starts spinning around (CPU jumps to 95-98%) for almost 30-45 seconds before I can continue with next command.
   The behaviour is random, but when it starts working slow, then it continues. It usually happens when I open two InDesign… more

   18 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   CLOSED  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   Many internal as well as external factors can cause the InDesign application to perform poorly.

   We completed the investigation and came up with the following: Either the issue has been resolved in the most recent release of InDesign (Refer to InDesign Release notes), the issue was intermittent at the time of reporting and is no longer reproducible, or the InDesign version mentioned in the report is no longer covered by Creative Cloud Support Policy.

   We would recommend you upgrade to the latest version as it is more robust. If you are still facing this issue even after updating it, create a new UserVoice thread or Contact Adobe support.

2. [ID-4219711] Defining a stroke beginning with a gap does not work

   If you define a stroke you can set the length of the first stroke to zero. But as you can see in the screenshot there is still some stroke visible.

   Best solution: Make a "zero stroke" possible, a stroke which starts with a gap.

   Second best solution: Change the minimum in the "length"-field to something > 0.

   •  

   18 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Styles  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Under Review  ·  amaarora responded

   Thanks for reporting.
   We will review the issue

   -InDesign Team

3. cross-references bug introduced with 2018.1 update

   The 2018.1 "search" added to cross-references is great and will be very helpful. Unfortunately it appears that a bug was introduced in the process of adding this feature.

   When you double-click on a cross-reference in the Cross-References panel, it opens the Edit Cross References window. This used to open the window to the cross-reference you selected so you could edit it. Now, it opens the window at [All Paragraphs] with the first paragraph in this list selected.

   This is a MESS for my workflow, as I now have to search through the cross-references to find and select the one I want to edit. Fortunately, it is easier to do this now that the search box is there – but it’s an extra step that requires typing the cross-reference into the search box to find it.

   Hopefully you guys will be able to fix this soon so double-clicking on a cross-reference in the panel works the way it did before. Thanks!

   The 2018.1 "search" added to cross-references is great and will be very helpful. Unfortunately it appears that a bug was introduced in the process of adding this feature.

   When you double-click on a cross-reference in the Cross-References panel, it opens the Edit Cross References window. This used to open the window to the cross-reference you selected so you could edit it. Now, it opens the window at [All Paragraphs] with the first paragraph in this list selected.

   This is a MESS for my workflow, as I now have to search through the cross-references to find and select the… more

   18 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   7 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Closed: Fixed  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   This issue was fixed in ID CC2019 version.

   Please update to the latest version of InDesign available via Creative Cloud application.

   Adobe InDesign team

4. InDesign performance issue: New document window gives blank screen

   Latest version of InDesign supplied by Creative Cloud installer on 64-bit Windows 10 PC.

   Steps to reproduce:
   1. File - New Document.
   2. Bingo...

   Expected result:
   A useful window with options to create a new document.

   Actual result:
   A useless blank screen (see attached screenshot).

   •  

   •  

   •  

   •  

   •  

   18 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   24 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  Abhinav Kaushik responded

   Hello All,
   Thank you for reporting the issue to us.
   We have fixed the issue in the latest version of InDesign, Id 15.0

   Please upgrade your InDesign application to the latest version to try out the fix.

   If you face any problems with the new update, do let us know in the comments.

   You may also follow the below given link for the list of all fixed issues in Id 15.0
   https://helpx.adobe.com/indesign/kb/fixed-issues.html

   -InDesign Team

5. InDesign performance issue: Hangs when exporting to PDF

   1. Latest Indesign CC, Windows 10
   2. ID would sometimes not finish the export to PDF task and hangs for minutes. It must then be killed in the task manager. During this it constantly consumes a big lot of RAM and CPU power. See attachment.

   •  

   18 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   33 comments  ·  PDF Export  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  amaarora responded

   Fix for this issue is now available in the latest update of InDesign 2020 – that is, InDesign 15.0.1

   In the Creative Cloud Desktop application, click on the Updates section on the left. You should be able to see the Update available for InDesign. Please update your InDesign application to this version to try out the fix.

   Let us know in the comments section if you face any problem with the updation process.

   —
   Adobe InDesign Team

6. Cannot resize Epub Interactivity Preview panel

   I can not resize the Epub Interactivity Preview Panel at all.
   I am using the latest InDesign CC 2018.

   SWF Preview panel is fine.

   • 

   18 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   21 comments  ·  ePub/HTML/Publish Online  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Closed: Fixed  ·  amaarora responded

   Hi all,

   We worked on this issue . Please update InDesign to latest release i.e. 14.0.2 and let us know if the issue is fixed for you.

   Thanks

7. [ID-4273456] Press the opt/alt key after dragging, it duplicated to the incorrect layer

   InDesign 2026 （and earlier, too）I was found out in CS6.

   Issue:
   When drag and duplicate any object, the duplicate destination will be the previous active layer under certain conditions.

   Reproduction procedure:
   1 Layer panel "Paste Remembers Layers" check off
   2 Unselect, and duplicate the object Activate layers other than the layers of the object
   3 Start dragging and add the option/alt key in the middle of dragging
   4 After dragging, the object is duplicated to the layer that was active in step 2

   Ideal result:
   The uplication by dragging will be duplicated to the same layer as the original regardless of any setting.

   I really hope to correct it.
   Regards.

   <にほんご / Japanese>
   opt/altキーをドラッグの後から押すと正しくないレイヤーに複製される

   InDesign 2026 （と、それ以前も）私はCS6で発覚しました

   問題
   ドラッグ複製したいとき、特定の条件で複製先が以前のアクティブレイヤーになる

   再現手順
   1 レイヤーパネルプション「コピー元のレイヤーにペースト」チェックをオフ
   2 選択を解除し、複製するオブジェクトのレイヤー以外のレイヤーをアクティブにする
   3 ドラッグを開始し、ドラッグの途中でoption/altキーを追加する
   4 ドラッグ終了後、オブジェクトは手順2でアクティブだったレイヤーに複製される

   理想の結果
   ドラッグによる複製はいかなる設定にも関係なくオリジナルと同一のレイヤーに複製されること

   修正をすごく希望します。
   よろしくー。

   InDesign 2026 （and earlier, too）I was found out in CS6.

   Issue:
   When drag and duplicate any object, the duplicate destination will be the previous active layer under certain conditions.

   Reproduction procedure:
   1 Layer panel "Paste Remembers Layers" check off
   2 Unselect, and duplicate the object Activate layers other than the layers of the object
   3 Start dragging and add the option/alt key in the middle of dragging
   4 After dragging, the object is duplicated to the layer that was active in step 2

   Ideal result:
   The uplication by dragging will be duplicated to the same layer as the original regardless… more

   17 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   2 comments  ·  Others  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Under Review  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   Hi,

   Thank you for reporting the issue. We have been able to reproduce the issue, and it is currently under investigation.

   —

   Adobe InDesign Team

8. "Insufficient data for an image" error is shown on opening PDF in Acrobat

   We are experiencing issues with exporting to PDF. Hi res PDF Compatibility Acrobat 7 (PDF 1.6).
   The PDF is created normally, but when opening the PDF, it sometimes happens that the image is not displayed on one or more pages. The error message for this specific page is: ERROR: Insufficient data for an image.
   We tried to solve this problem within our team. Eventually, we discovered that the issue did not occur for one of our colleagues. Further investigation revealed that this colleague was still using an older version of InDesign (18.3). The colleagues experiencing problems had automatic updates enabled and were working on the new version 18.4. I then uninstalled my 18.4 version and reverted back to 18.3, and the PDF exports started working as before without the error message.

   I hope you can look into this and perhaps address it in the new InDesign version.

   Best regards,
   Mike Böger
   Moolenaar BV

   We are experiencing issues with exporting to PDF. Hi res PDF Compatibility Acrobat 7 (PDF 1.6).
   The PDF is created normally, but when opening the PDF, it sometimes happens that the image is not displayed on one or more pages. The error message for this specific page is: ERROR: Insufficient data for an image.
   We tried to solve this problem within our team. Eventually, we discovered that the issue did not occur for one of our colleagues. Further investigation revealed that this colleague was still using an older version of InDesign (18.3). The colleagues experiencing problems had automatic updates enabled… more

   •  

   17 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   11 comments  ·  PDF Export  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   This issue has been fixed in the latest release of InDesign - version 18.5 that has just been made available publicly.

   Please download this update from Creative Cloud Desktop app to get the fix.

   --

   Adobe InDesign team

9. Reading order issue when a footnote is split over to next page or column

   When a footnote split over to next page or column, the accessible PDF generated from InDesign CC 2023 has notes reading order messed up. The first note reference on the page where the portion of a note comes in from the previous page/column reads the continued note text and likewise the second note reference reads the first note and so on. Eventually the last note is read at the end regardless it's note reference. It's a serious issue because not only the reading order needs to be fixed for the last note on the page that has splitting to the next column or page but also all the notes appearing on that page where the split portion has come in will also need to be fixed manually.

   To my mind It's a critical bug that is making InDesign unusable to create accessible content and needs to be addressed on highest priority.

   When a footnote split over to next page or column, the accessible PDF generated from InDesign CC 2023 has notes reading order messed up. The first note reference on the page where the portion of a note comes in from the previous page/column reads the continued note text and likewise the second note reference reads the first note and so on. Eventually the last note is read at the end regardless it's note reference. It's a serious issue because not only the reading order needs to be fixed for the last note on the page that has splitting to the… more

   • 

   17 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   4 comments  ·  Accessibility  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   The fix of the issue is now available in the latest InDesign 2026(v21.0.0.192). We recommend you upgrade to the latest version for the fix.

   If you are unable to see the update, go to the Creative Cloud application, click on the context menu on the top right, and click on Check for App Updates.

   —

   Adobe InDesign Team

10. # in URLs of Hyperlinks in Hyperlinks panel is substituted with %23 when opened in browser from panel

    Hi together,
    when working with hyperlinks with URL destination an URL like:

    https://wiki.selfhtml.org/wiki/HTML/Elemente/a#Siehe_auch

    will not be transferred to the browser as is when the menu command "Go to Destination" is used or if the "green" bullet in the panel is clicked that indicates a correct and connectable hyperlink destination.

    Instead character # will be substituted with %23 like that:

    https://wiki.selfhtml.org/wiki/HTML/Elemente/a%23Siehe_auch

    The implication could be two-fold:
    [1] The browser could show an 404 error
    [2] The browser could not navigate to the named anchor and the view of the page is showing the top part of the page.

    The URL above will show error [2].
    This URL will show a 404 error:

    https://www.histaminintoleranz.ch/en/symptoms.html#zusammenfassung

    For the first error, the 404, I included screenshots and a sample InDesign document from InDesign 2023:

    Here the correct destination when the URL is copied to the browser:
    URL-CopiedToBrowser-CorrectPageView.png

    Hyperlinks panel showing the command "Go to Destination" in my German InDesign 2023:
    GoToURLinInDesign_Hyperlinks-Panel.png

    Result is this 404 error in the browser:
    GoToURLinInDesign_404-Error.png

    Test document where the hyperlink is attached to a rectangle:
    URLWith#ShowsAs%23Example-2CC-2023.indd

    FWIW: Due to restrictions of the UserVoice forum software the InDesign document could not be attached to this bug report. Instead I zipped it and tried to attach the zip file. Also this failed. So I added a *.txt to the file name:

    URLWith#ShowsAs%23Example-2CC-2023.indd.zip.txt

    Regards,
    Uwe Laubender
    ( Adobe Community Expert )

    Hi together,
    when working with hyperlinks with URL destination an URL like:

    https://wiki.selfhtml.org/wiki/HTML/Elemente/a#Siehe_auch

    will not be transferred to the browser as is when the menu command "Go to Destination" is used or if the "green" bullet in the panel is clicked that indicates a correct and connectable hyperlink destination.

    Instead character # will be substituted with %23 like that:

    https://wiki.selfhtml.org/wiki/HTML/Elemente/a%23Siehe_auch

    The implication could be two-fold:
    [1] The browser could show an 404 error
    [2] The browser could not navigate to the named anchor and the view of the page is showing the top part of the page.

    The URL above… more

    • 

    •  

    •  

    •  

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    9 comments  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. PDF/X-1a運用において、危険度が高い「画像の配置方法」を発見しましたので報告させていただきます。

    Indesign （15.1.3）（16.4）（17.3）などで以下の現象を確認できます。
    表を作成し、「セルをグラフィックセルに変換」という機能を使用せずに、空のままのセル内に画像を配置します。
    配置方法は、何も選択していない状態で「ファイル」、「配置」、画像を選択して「開く」、配置先のセルをクリックといったものです。
    この配置方法でドキュメントを作成し、「プリント」より出力して確認したところ何の問題もありません。
    印刷会社へ渡すためのPDF/X-1aを「書き出し」より出力します。
    期待する結果としては、「プリント」からの出力結果と同等のPDFが作成されることです。
    実結果は、Illustratorのドロップシャドウが黒ベタに、同ぼかし効果が無効に、Photoshopのレイヤマスクが黒ベタになったPDFが作成されてしまいます。
    以上です。

    •  

    •  

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under Review  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    Hi,
    We have been able to reproduce the issue and it is currently under investigation.

    —

    Adobe InDesign Team

12. "Selection" and "Direct Selection" tool icons mixed up in toolbar

    The button images for "selection" and "direct selection" tools are mixed-up. The buttons are still in their correct place, but the "selection tool" button now displays the white arrow in the toolbar, the "direct selection" button the black arrow.

    The mouse arrows themselves remain correct, as do their functions.

    •  

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    12 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    We're happy to announce that we've reverted the icons of Selection Tool and Direct Selection Tool in the latest update of InDesign - version 17.2 that is available from Creative Cloud Desktop application.

    Please update to this latest version to see the change of these tool icons.

    --

    Adobe InDesign team

13. GREP search failed to match all text in a story

    We use to be able to search all text in a story by using this (?s).+ code. It’s working fine in CS6. But in CC2019, 2020, and 2021 on both Mac and Windows it will fail to select all text in the story if there is more than ~ 50000 character. Only the first ~ 50000 will be selected.

    This might be related to an old bug that was introduced in 14.0.2 that was fixed in 14.0.3.

    Steps to Reproduce:
    1. Create a document with one story containing more than 50000 characters
    2. Do a GREP Find using (?s).+

    A similar issues when trying to use \X+ to select all text in a story. Only some portions of the text over multiple of ~ 50000 text will be selected.

    We use to be able to search all text in a story by using this (?s).+ code. It’s working fine in CS6. But in CC2019, 2020, and 2021 on both Mac and Windows it will fail to select all text in the story if there is more than ~ 50000 character. Only the first ~ 50000 will be selected.

    This might be related to an old bug that was introduced in 14.0.2 that was fixed in 14.0.3.

    Steps to Reproduce:
    1. Create a document with one story containing more than 50000 characters
    2. Do a GREP Find using (?s).+

    … more

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under Review  ·  amaarora responded

    Thanks for reporting. We will review the issue

    -InDesign Team

14. [ID-4260994]The filter in the review panel is automatically changing to "resolved"

    This happens very frequently.

    I will be going through user comments given online in the Indesign Review tab. As I do them I resolve them. This works fine.

    But then suddenly and randomly it will just decide to change my filter to show all resolved! Then all the old issues magically appear in the tab again until I go back to filter and unselect the Resolved button.

    Then it happens again. And again. It happens only when I go to change something in the document but it doesn't seem to matter what type of issue i'm doing. Replacing text. Deleting, etc.

    I'm also finding that comments are taking a few minutes to get from the web into indesign as i keep seeing the little wheel turning a lot.

    This happens very frequently.

    I will be going through user comments given online in the Indesign Review tab. As I do them I resolve them. This works fine.

    But then suddenly and randomly it will just decide to change my filter to show all resolved! Then all the old issues magically appear in the tab again until I go back to filter and unselect the Resolved button.

    Then it happens again. And again. It happens only when I go to change something in the document but it doesn't seem to matter what type of issue i'm doing. Replacing text. Deleting,… more

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    12 comments  ·  Share for Review  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under Review  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    Hi,

    Thank you for reporting the issue. We have been able to reproduce the issue and it is currently under investigation. 

    —

    Adobe InDesign Team

15. InDesign is not correctly role mapping all paragraph styles to tags, when creating an accessible tagged interactive PDF

    I am using InDesign 15.1.1 to create several accessible, tagged PDFs.
     
    I have tagged every paragraph style correctly under the export tags for PDF (Edit all export tags > show: PDF), and I have left any list items and table of contents items with the default ‘Automatic’ tag.
     
    I am exporting as an interactive PDF with ‘Create tagged PDF’ checked. 
     
    Then when viewing the PDF in Acrobat Pro DC, in the Tags pane I have selected ‘Apply role mapping to tags’. This should ensure that in the tags pane in Acrobat, all my original paragraph style names are displaying as the tags that I have created. But this is not happening. I am finding that some of the tags are role mapping correctly, while several other tags are appearing incorrectly role-mapped with their original paragraph style names in place instead of the tags that I had assigned to them in InDesign.

    There seems to be no logic to this. This role mapping problem is occurring on every document I export as a tagged interactive PDF, no matter the size (i.e. from a small 12pp booklet to a large 125pp brochure). The only common characteristic is that the initial pages of the PDF have the tags correctly role mapped, but then as the document progresses some of the tags start to break down with their tags not appearing and instead their original paragraph style names are displayed. I have tried exporting the PDF from my another Mac and I get the same result.

    Today I have discovered something interesting: if I export just a few pages at a time then the role mapping is working correctly. The problem seems to occur when I export the full document – InDesign does not seem to be able to export all the information correctly en masse.

    Note: I have updated to InDesign 15.1.2 today and the problem is still occurring.

    I am using InDesign 15.1.1 to create several accessible, tagged PDFs.
     
    I have tagged every paragraph style correctly under the export tags for PDF (Edit all export tags > show: PDF), and I have left any list items and table of contents items with the default ‘Automatic’ tag.
     
    I am exporting as an interactive PDF with ‘Create tagged PDF’ checked. 
     
    Then when viewing the PDF in Acrobat Pro DC, in the Tags pane I have selected ‘Apply role mapping to tags’. This should ensure that in the tags pane in Acrobat, all my original paragraph style names… more

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  PDF Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. Relink from CC Libraries Sorting

    When Relinking assets in InDesign using "Relink from CC Libraries", the CC Libraries panel that shows isn't capable of having its sort order (date modified vs alphabetically) changed nor is it able to show Groups - please fix so it has the same view functionality as the regular CC Libraries Panel.

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    9 comments  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Adobe Fonts automatically substituting versions of fonts that are document-stalled

    When I open an InDesign file that has been packaged with all the fonts (non-Adobe Fonts) included in the Document fonts folder, if I happen to have the same version of the font activated in Adobe Fonts, InDesign automatically, and without warning, substitutes the Adobe Fonts version. This is a major problem. The heirarchy should be document-installed fonts FIRST, then InDesign can look in Adobe Fonts and suggest replacing it. This should not be done without warning in the background. It means that the person who was working in a package workflow without using any Adobe Fonts can send a file to another person using Adobe Fonts, who unbeknownst to them, substitutes the font, then packages and returns the file, and now the font is missing from the new package when returned. This is a huge licensing issue at the very least.

    When I open an InDesign file that has been packaged with all the fonts (non-Adobe Fonts) included in the Document fonts folder, if I happen to have the same version of the font activated in Adobe Fonts, InDesign automatically, and without warning, substitutes the Adobe Fonts version. This is a major problem. The heirarchy should be document-installed fonts FIRST, then InDesign can look in Adobe Fonts and suggest replacing it. This should not be done without warning in the background. It means that the person who was working in a package workflow without using any Adobe Fonts can send a… more

    •  

    •  

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    Closed: Not Reproducible  ·  1 comment  ·  Print/Packaging  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. Publish Online feature has issues when viewed in iOS 13

    We are using the "Publish Online" feature inside Adobe Indesign to make some of our content available on our website. We've recently received reports from users with Apple iOS 13 mobile devices that the content is not displaying properly on those types of mobile phones. When the content first opens, if you double tap the page zooms in ok and double tapping again zooms out ok. However, if you try to pinch/zoom, the page blows up very large such that you can only see a couple words and you cannot pinch to get back out. Sometimes double-tapping again takes it back to a normal view, but often it zooms back out with part of the page cut off. This content was created using InDesign Creative Cloud 14. I spoke with tech support and she indicated a ticket was filed with the engineering team. Posting here as well for others to be aware and to receive updates!

    We are using the "Publish Online" feature inside Adobe Indesign to make some of our content available on our website. We've recently received reports from users with Apple iOS 13 mobile devices that the content is not displaying properly on those types of mobile phones. When the content first opens, if you double tap the page zooms in ok and double tapping again zooms out ok. However, if you try to pinch/zoom, the page blows up very large such that you can only see a couple words and you cannot pinch to get back out. Sometimes double-tapping again takes it… more

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    12 comments  ·  ePub/HTML/Publish Online  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    This issue has been fixed in the latest InDesign version - InDesign 2023.

    --

    Adobe InDesign team

19. Cmd-O or Cmd-N doesn't work after InDesign starts up.

    This has been an annoying bug for a while. If you open indesign, then use the command-O or command-N key to open/create a file, nothing happens. You just get an alert sound.

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    26 comments  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    The fix for this issue is now available in the latest update of InDesign – version 16.0.1.

    Please update to this version to get the fix.

    —
    Adobe InDesign team

20. Reveal in Finder on NAS Server not working

    When using InDesign 14.0.3, on mac OS X Catalina (10.15.1), ctrl clicking the .indd file's title bar to reveal in finder doesn't work (switches to finder but doesn't reveal) if the .indd file is stored on NAS RAID server. Server connection is afp://
    Revel in Finder command works fine if the .indd file is stored locally.

    •  

    17 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    17 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under Review  ·  amaarora responded

    Thanks for reporting. We will review it

    -InDesign Team