6802 results found

1. interface small

   Icons and font in indesign cc 2018 is too small
   What about solving this issue
   Thanks

   10 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   5 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   FIXED  ·  AdminRavi Kiran (Senior Lead Quality Engineer, Adobe InDesign) responded

   Scalable UI feature is now available in InDesign 2022.

   With this feature, you can scale the UI of InDesign and InCopy on both Mac and Windows.

   —
   Adobe InDesign team

2. Exporting Emojis to PDF

   I built a newsletter with the use of the new Apple Emoji "glyphs" in InDesign and when I went to export it as a PDF, it replaced my emojis with random images from my file.

   I talked with Adobe support and learned that only vector emojis can be used in PDFs which is a bit frustrating! Can we update the PDF export capability to include these new emoji features, so we can use the glyphs like I think that they were intended? I'd be a happy camper!! Thank you in advance!

   10 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  PDF Export  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Closed: Fixed  ·  Abhinav Kaushik responded

   It is already fixed and available in CC 2019 builds.
   Closing the thread.

   -InDesign Team

3. Tab controls are buggy. InDesign CC 2018

   When using the Tabs control dialogue box all sorts of problems begin to manifest. First, as you are working with the tabs controls page elements go sideways. Text overlaps, sometimes entire paragraphs preceding the area you are working in.

   On occasion, the tabs simply don't line up to where you assign them, even when you do so numerically. (See screenshot)

   Settings for paragraph styles take precedence over tabs settings (even though tabs traditionally were the opposite, taking precedence.)

   •  

   •  

   •  

   10 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   15 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Closed: Fixed  ·  amaarora responded

   Hi,
   This issue has been fixed in latest InDesign versions. Please let us know in comments in case you still encounter the bug

   -InDesign Team

4. InDesign changing opacity for an unselected item

   I am trying to place a slightly opaque rectangle over an image but when I select to lower the opacity on the rectangle, the image (regardless if it's above or below) changes as well.

   What's more odd is when I select that photo after I do the action, the image says it is at 100%. The "change" has not been reflected. I have uploaded a 1-2-3 photo demo. Note the photo's slight change in transparency although set at 100%.

   This happens when the photo and rectangle are in separate layers, as well. The two items are not placed within each other. They are also not grouped.

   Just updated InDesign today as well -- running InDesign CC 2018.

   I am trying to place a slightly opaque rectangle over an image but when I select to lower the opacity on the rectangle, the image (regardless if it's above or below) changes as well.

   What's more odd is when I select that photo after I do the action, the image says it is at 100%. The "change" has not been reflected. I have uploaded a 1-2-3 photo demo. Note the photo's slight change in transparency although set at 100%.

   This happens when the photo and rectangle are in separate layers, as well. The two items are not placed within each… more

   • 

   • 

   •  

   •  

   •  

   10 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   14 comments  ·  Effects/Transparency  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Resolved For User  ·  AdminRavi Kiran (Senior Lead Quality Engineer, Adobe InDesign) responded

   The magic of InDesign’s effects all happens via Adobe’s transparency technology, which allows us to blend colors and detail from different objects. In order for it to all work there has to be a consistent color space for InDesign to use when it blends colors. This is called the Transparency Blend Space and it’s really important that you understand it in order to get the most out of InDesign’s effects. When we use transparency effects, InDesign compares different objects and combines their colors and detail. In order for objects to be blended, they have to be in the same color space. So when you apply transparency, InDesign converts everything on a spread to the Transparency Blend Space, regardless of whether that object is actually involved in the effect. And it’s important to note that when we say things are converted, we don’t mean that InDesign alters your placed files; they are left completely alone. What we mean is that InDesign is using a different method for interpreting the colors in those files. It simulates as if you change the colors in those documents, just to give itself a reliable method for blending. It’s a totally nondestructive change. See the Transparency Blend Space and check if it is Document CMYK. So now if you apply any transparency on this spread, everything on the spread will be converted to the Document CMYK blend space. You can test this by selecting any object and going to the Effects panel and just changing the Opacity from 100% to 99% and you can see that all the colors shift. That’s really interesting because they’re not even touching. But just because they’re on the same spread, InDesign will convert them to the transparency blend space.

   Remember, everything on a spread is converted to the blend space that is selected under the Edit menu. Keep an eye out for color shifts when you apply effects and know what color spaces your document is using. Make sure they are appropriate for your final output. That way you won’t get any unexpected color changes at the end of your workflow.

   You can also watch the video : “Assign the Transparency Blend Space” by David Blatner and “Understanding Transparency Blend Space” by Mike Rankin (both on LinkedIn Learning) to learn how this feature works.

   Hope it helps.

   —
   Adobe InDesign team

   The magic of InDesign’s effects all happens via Adobe’s transparency technology, which allows us to blend colors and detail from different objects. In order for it to all work there has to be a consistent color space for InDesign to use when it blends colors. This is called the Transparency Blend Space and it’s really important that you understand it in order to get the most out of InDesign’s effects. When we use transparency effects, InDesign compares different objects and combines their colors and detail. In order for objects to be blended, they have to be in the same color space. So when you apply transparency, InDesign converts everything on a spread to the Transparency Blend Space, regardless of whether that object is actually involved in the effect. And it’s important to note that when we say things are converted, we don’t mean that InDesign alters your placed files; they… more

5. Opening file in Adobe InDesign CC 2018 prevents same file from opening in InCopy CC 2018

   InCopy CC 2018 users get kicked out of file if file is opened in InDesign CC 2018. InCopy CC 2018 cannot open files create in InDesign CC 2018. See attachment.

   •  

   10 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   6 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Closed: Fixed  ·  AdminRavi Kiran (Senior Lead Quality Engineer, Adobe InDesign) responded

   The issue has been fixed with Apple’s MacOS High Sierra 10.13.4 Beta (17E139).

   Thanks,
   InDesign Team

6. Search field does not work in Open dialogue box

   Simple search filename request in the Open dialogue box and the search does not work in InDesign. This works in EVERY SINGLE OTHER APPLICATION KNOWN TO MAN. Just not in InDesign. InDesign is becoming the most unstable app I have ever worked within in over 10 years. Come on Adobe - this is Mac App 101 and you are FAILING MISERABLY. Fix this embarrassment immediately.

   •  

   •  

   •  

   • 

   • 

   10 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   11 comments  ·  Others  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Closed: Fixed  ·  Sumit Garg responded

   Hi,

   This issue has been fixed in our latest release. Please update your InDesign and follow the steps mentioned in below link, for fixing this issue.
   https://helpx.adobe.com/indesign/kb/file-search-does-not-work.html

   Above mentioned steps are required only once. So, that existing files are included inside search index.

7. Inserted Images appear distorted under macOS High Sierra (Version 10.13 (17A365) and Adobe InDesign CC (Version 2017.1)

   In InDesign is a Problem with inserted Images. Sometimes the inserted Pictures appearing distorted when u switch to preview mode.

   •  

   •  

   •  

   •  

   •  

   10 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   5 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Closed: Fixed  ·  Abhinav Kaushik responded

   Please update InDesign to the latest version, InDesign CC 2018 (13.0) for the fix of the issue.

8. Scripts Panel Sorting

   InDesign 2017.1 (v12.10.56); macOS High Sierra 10.13

   When I open the Scripts Panel, nothing is in order. It used to be in alphabetical order like the Scripts Panel folder in my user library.

   •  

   10 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   14 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Closed: Fixed  ·  Abhinav Kaushik responded

   Hello All,

   Issue has been fixed in InDesign’s latest update, Id 13.1.
   Please update your InDesign for the resolution of the problem.

   Thanks,
   Abhinav

9. [ID-4258210][MAC]Screen flickering occurs while moving objects in InDesign 2025(v20.X), no issues with InDesign 2024(v19.X)

   Impact

   Screen flickering occurs while moving objects in InDesign 2025(v20.X)

   Steps to Reproduce the issue:

   • Launch InDesign on MAC.
   • Create a new file and add some objects.
   • Attempt to move the objects.

   Workaround

   • Turn ON GPU Performance
   • Downgrade to InDesign 2024

   •  

   •  

   •  

   •  

   •  

   •  

   •  

   9 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   9 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close
   Under Review  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   Hi,

   Thank you for reporting the issue. We have been able to reproduce the issue and it is currently under investigation. 

   —

   Adobe InDesign Team

10. Drawing glitches when placing transparent PNGs in RGB documents on monitors with specific color profiles

    Applicable to Any Version of Mac/InDesign

    When using an EIZO color management monitor with a profile created by ColorNavigator where "Reflect Black Level in Tone Curve" is enabled, placing a transparent PNG into an RGB document causes severe drawing issues, rendering the document almost unusable.

    This issue occurs only when GPU rendering is enabled and does not happen with CPU rendering. Additionally, it does not occur when placing a transparent PNG in a CMYK document.

    Even under the same conditions, this issue does not occur in Photoshop or Illustrator, only in InDesign.

    While creating a profile with "Reflect Black Level in Tone Curve" turned off can avoid this issue, this setting is crucial for accurate proofing in Photoshop, so turning it off is not a viable solution.

    This appears to be a problem with GPU-based rendering in InDesign. I hope this can be fixed.

    特定のカラープロファイルを当てたモニタ上で、RGBドキュメントに透過PNGを貼ると描画が崩れる

    Mac/InDesignのバージョンは問わない

    EIZOカラーマネジメントモニタ上で、ColorNavigatorで「黒レベルを階調特性を反映する」をオンにしたプロファイルを使用しているとき、RGBドキュメント上に透過付きPNGを配置するとドキュメントの描画が操作できないレベルで崩れます。

    これはGPU表示をオンにしていると発生し、CPU表示では起きません。
    またCMYKドキュメントでは、透過PNGを配置しても発生しません。

    同じ条件下でも、PhotoshopやIllustratorでは描画の崩れは発生しません。InDesignのみで発生します。

    「黒レベルを階調特性を反映する」をオフにしたプロファイルを作成すれば発生しませんが、この項目はPhotoshop上での校正表示に影響を与えるため、オフにはできません。

    InDesignのGPUを使った描画に問題があります。修正を希望します。

    Applicable to Any Version of Mac/InDesign

    When using an EIZO color management monitor with a profile created by ColorNavigator where "Reflect Black Level in Tone Curve" is enabled, placing a transparent PNG into an RGB document causes severe drawing issues, rendering the document almost unusable.

    This issue occurs only when GPU rendering is enabled and does not happen with CPU rendering. Additionally, it does not occur when placing a transparent PNG in a CMYK document.

    Even under the same conditions, this issue does not occur in Photoshop or Illustrator, only in InDesign.

    While creating a profile with "Reflect Black Level… more

    •  

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

11. Two Monitors - UI Window Always Loads Off Screen - Can't Resize Mac OS 14.5

    This has been a bug for at least 5 years with InDesign (see link at the bottom of the post).

    When a Mac user has two monitors, if the primary monitor is situated "lower" than the secondary monitor in a side-by-side configuration in the Display "Arrange" setting (see screenshot, main display is laptop, on right), then the windows will always load slightly off screen, locking the user out of moving them or rearranging them.

    There is a temporary fix to put the main monitor "higher" than the secondary monitor in the horizontal arrangement.

    However, this is an unacceptable long term fix. The Display Arrangement tool is so that you can position your monitors virtually how they are set up physically to make moving things between them intuitive and easy.

    Moving them out of alignment to accommodate one weird Adobe product issue is silly.

    Mac users with multiple side-by-side monitors is NOT a small part of the InDesign userbase. This is not a niche issue. Many many users have this basic setup. This bug has existed for way too long, since at least 2019.

    Please fix this.

    https://community.adobe.com/t5/indesign-discussions/the-indesign-application-frame-gets-stuck-outside-the-screen-area-behind-menu-bar/td-p/10378678

    This has been a bug for at least 5 years with InDesign (see link at the bottom of the post).

    When a Mac user has two monitors, if the primary monitor is situated "lower" than the secondary monitor in a side-by-side configuration in the Display "Arrange" setting (see screenshot, main display is laptop, on right), then the windows will always load slightly off screen, locking the user out of moving them or rearranging them.

    There is a temporary fix to put the main monitor "higher" than the secondary monitor in the horizontal arrangement.

    However, this is an unacceptable long term… more

    •  

    •  

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

12. Multi-character input from Indic keyboards failing

    Tested in InDesign 2023 18.5.1 and 2024 19.1, on Mac OS Ventura 13.4

    Several Indic keyboard layouts include keys that input a sequence of more than one character as a shortcut for typing the common –ra,, r–, or other syllabic forms that Unicode encodes as a sequence of multiple characters. So, for example, the Mac Sinhala keyboard assigns the following multi-character sequences to individual keys:

    [`] = ්‍ර (rakārānsaya, U+0DCA U+200D U+0DBB)

    [Shift]+[`] = ර්‍ (repaya, U+0DBB U+0DCA U+200D)

    [Shift]+[H] = ්‍ය (yansaya, U+0DCA U+200D U+0DBA)

    But in InDesign only the first character of each sequence is input, the second and third characters are not input. I have tested the same keyboards in multiple other programs, including Adobe programs such as Illustrator, and they work find everywhere except InDesign.

    I have found the same problem with Indic multi-character keys testing the Mac Hindi, Kannada, Sinhala, and Telugu keyboards, so it seems to be a general problem with keyboards that input more than one character from a single keystroke.

    Tested in InDesign 2023 18.5.1 and 2024 19.1, on Mac OS Ventura 13.4

    Several Indic keyboard layouts include keys that input a sequence of more than one character as a shortcut for typing the common –ra,, r–, or other syllabic forms that Unicode encodes as a sequence of multiple characters. So, for example, the Mac Sinhala keyboard assigns the following multi-character sequences to individual keys:

    [`] = ්‍ර (rakārānsaya, U+0DCA U+200D U+0DBB)

    [Shift]+[`] = ර්‍ (repaya, U+0DBB U+0DCA U+200D)

    [Shift]+[H] = ්‍ය (yansaya, U+0DCA U+200D U+0DBA)

    But in InDesign only the first character of each sequence is input, the second… more

    •  

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

13. Copy & paste within a numbered list can cause wrong numbering

    If you create a numbered list which runs over 2 or more columns and copy some text within the list from one paragraph to another the numbering changes. In my example you have 2 times 1 in the list.

    To make it even more crazy this only happens when you use the Adobe Single-line composer. If you work with the Adobe ParagraphComposer there's no problem at all.

    If you change the text frame from 2 columns to 1 column and back the error disappears as well.

    •  

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

14. InDesign and PDF comments: extremely slow

    1. Version of Adobe InDesign V 18.0
    2. Importing the PDF comments to indesign, some tags when selected, makes the program extremely slow, taking several minutes to release the indesign again.
    3. The expected result would be that it was a matter of seconds and not minutes.
    4. The basic ones work very well, but markings like geometric figures and annotations make the indesign very slow.
    5. And here's a link to a video to see how you need to switch from one appointment to another: https://www.dropbox.com/s/jzxsh7t9ci0a8y1/teste.mp4?dl=0
    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    7 comments  ·  PDF Comments  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

15. Can't grab window

    When working on an InDesign file, when I need to grab the InDesign window (by clicking and dragging) and move it, I usually have to make three attempts before my mouse "catches" the window. InDesign 17.2, Mac Studio OS 12.3.1. It's very random when it works and not works, but mostly it doesn't work on the first attempt.

    • 

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

16. InDesign not displaying actual (print) size

    InDesign 2021 does not actually show you the printed size of the document.

    There are two potential (and faulty) options to achieve this currently:

    1. Set the zoom level to 100%: On various forums I've read that this should let you view the document at actual print size. A document that physically takes up 10x10cm on your screen, should print at 10x10cm.

    In effect, that doesn't happen and the 100% renders my document at a way larger size than what it's actual size. (I'm literally holding up a ruler against my screen, and a 10cm wide page is about 20cm wide on the screen).

    1. Go to view>view actual size: This one comes closer - the document (and thus objects in it) are rendered about 1.3 smaller than the real-actual dimensions they'll be printed at (as opposed to 2 times bigger in the previous method).

    Again, this doesn't actually work and I'm wondering what it's intended to do.

    My suggested solution:

    I'm using a 4k, 15.6" Dell monitor, and photoshop did this also. It even has a "printed size" in addition to "actual size", which also didn't render things in their correct size.

    After reading this article: https://www.photoshopessentials.com/essentials/print-size/
    I understood that photoshop assumes all screens are at 72dpi, and that causes the incorrect rendering. After "telling" photoshop my actual monitor dpi, which is 283 - it began rendering things correctly when choosing "view print size".

    I when to edit>preferences>units&increments, and tried setting the "points/inch" setting. It was at 72 at default, and I thought that setting it to 283 would solve the problem.

    When I tried doing so, a popup came up and said "the value must be between 60 and 80". So this obviously doesn't work. I'm wondering why this would be the case, as screens today have dpi's of way over 72 and 80.
    Maybe allowing entering higher dpi's will solve this problem?

    Anyway, if anyone knows a solution/idea on how to display print size, I'd love to hear it.

    Thanks,
    Alon

    InDesign 2021 does not actually show you the printed size of the document.

    There are two potential (and faulty) options to achieve this currently:

    1. Set the zoom level to 100%: On various forums I've read that this should let you view the document at actual print size. A document that physically takes up 10x10cm on your screen, should print at 10x10cm.

    In effect, that doesn't happen and the 100% renders my document at a way larger size than what it's actual size. (I'm literally holding up a ruler against my screen, and a 10cm wide page is about 20cm wide… more

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    6 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

17. Table header line (below) disappears half when editing text in InCopy

    We encounter an unusual behavior with table lines.

    When an editor edits text in InCopy and saves the changes, half of the line below the table’s headers disappears. See screenshots “Before” (expected result) and “After” (actual result) the editing. The structure of these particular tables is quite complex.

    We use Adobe InDesign/InCopy, version 15.1.3 x64, in combination with the WoodWing Studio Editorial System.

    •  

    •  

    •  

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

18. inDesign 16.1 - New version(s) do not keep color settings for documents

    Just one more thing to check EVERY time I look at the document.

    Reverts to ---- Emulate Adobe inDesign 2.0 CMS Off

    ISSUE
    A. Even after changing the Color Settings in an open document when I switch apps and come back the Colors Settings have reverted ---- Emulate Adobe inDesign 2.0 CMS Off ---- this is really, really annoying.

    B. Opening a document that had been saved in the current version - the Color Settings did not save with the document -

    ---

    I just made my regular preference without a document open - quit the program reopened -- the Color Settings defaulted back to the Adobe 2.0....

    HOWEVER that time the document I had switched and saved kept the Color Settings.

    Just one more thing to check EVERY time I look at the document.

    Reverts to ---- Emulate Adobe inDesign 2.0 CMS Off

    ISSUE
    A. Even after changing the Color Settings in an open document when I switch apps and come back the Colors Settings have reverted ---- Emulate Adobe inDesign 2.0 CMS Off ---- this is really, really annoying.

    B. Opening a document that had been saved in the current version - the Color Settings did not save with the document -

    ---

    I just made my regular preference without a document open - quit the program reopened -- the Color… more

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

19. Unable to type certain Hebrew letters with Diacritics on Mac

    InDesign

    ID CC 2017-2021; Hebrew (Middle East English)
    Mac 10.14.6

    Description:
    On mac, some letters with diacritics has lost their ability to produce diactritics and no longer work.

    The letters and how to type them with Hebrew script installed on system:
    1. Vav Holam
    2. Vav Shuruk
    3. Shin
    4. Sin
    5. Lamed holam

    An InDesign document is attached with samples and explanations.

    Steps to Reproduce:
    1. On a mac, add Hebrew Script to you system language.
    2. Open InDesign Middle Eastern Version and create a text box with the a Right to left Text tool.
    3. While the system script is set to Hebrew, try to type the following letters with the following shortcuts:
    1. Vav Holam - Shift+u
    2. Vav Shuruk - Atl+u
    3. Shin - Shift+a
    4. Sin - Alt+a
    5. Lamed Holam - Shit+k

    Actual Result:
    1. Vav Holam - Shift+u Produce ו
    2. Vav Shuruk - Atl+u Produce ו
    3. Shin - Shift+u Produce ש
    4. Sin - Atl+u Produce ש
    5. Lamed Holam - Shit+k Produce ל

    Expected Result::
    1. Vav Holam - Shift+u Should Produce וֹ
    2. Vav Shuruk - Alt+u Should Produce וּ
    3. Shin - Shift+a Should Produce שׁ
    4. Sin - Alt+a Should Produce שׂ
    5. Lamed Holam - Shit+k Should Produce לֹ

    This was reported to Adobe Pre-Release on Oct 21, 2018 and nothing was done about it!

    This report contains another letter with diacritics (number 5) that can't be typed in InDesign.

    InDesign

    ID CC 2017-2021; Hebrew (Middle East English)
    Mac 10.14.6

    Description:
    On mac, some letters with diacritics has lost their ability to produce diactritics and no longer work.

    The letters and how to type them with Hebrew script installed on system:
    1. Vav Holam
    2. Vav Shuruk
    3. Shin
    4. Sin
    5. Lamed holam

    An InDesign document is attached with samples and explanations.

    Steps to Reproduce:
    1. On a mac, add Hebrew Script to you system language.
    2. Open InDesign Middle Eastern Version and create a text box with the a Right to left Text tool.
    3. While the system… more

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

20. Hebrew Vowel Points Incorrectly Positioned

    When keying (or importing) Hebrew text, InDesign often misplaces vowel points when two or more vowel points are attached to a single base character unless the base character and vowel points are keyed in a specific order. I don't totally understand it, but it has something to do with Unicode normalization. Microsoft Word gets around this problem, but I can't say how. It would be nice, however, if InDesign could get around it, too.

    One Hebrew font, SBL Hebrew, has written Unicode features (?) to prevent the normalization problem, but most fonts cannot do this on their own in InDesign. Times New Roman, for example, sets fine in Word, but the same file in InDesign shows vowel points displaced. The user guide for SBL Hebrew (available easily online) explains the problem better than I can.

    Thanks for considering addressing this behavior.

    When keying (or importing) Hebrew text, InDesign often misplaces vowel points when two or more vowel points are attached to a single base character unless the base character and vowel points are keyed in a specific order. I don't totally understand it, but it has something to do with Unicode normalization. Microsoft Word gets around this problem, but I can't say how. It would be nice, however, if InDesign could get around it, too.

    One Hebrew font, SBL Hebrew, has written Unicode features (?) to prevent the normalization problem, but most fonts cannot do this on their own in InDesign.… more

    9 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close