7467 results found

1. Opening (book) document of same name but different path overwrites existing open file

   Finalizing a book with 15 chapters, each about 15 - 30 pages (total 505 pages in book). Have several different versions, in separate folders; all with same file names and book names. Recently discovered that some files in the "FINAL" folder had been overwritten with earlier versions.

   Is is sporadic and I have not been able to fully duplicatie. Looks like if A/chapter1 is open and then B/chapter1 is opened, A/chapter1 is overwritten with the content from B/chapter1. Something also occurs that causes A/chapter1 to get flagged as "possibly damaged" when next opened.

   I cannot tell if this occurs only when the book file is open, or if it happens every time (I don't do it often enough to track).

   Book containing the overwritten files will do successful pre-flight, but consistently CRASHES indesign completely when trying to do package for print. (Crash reports submitted)

   InDesign 17.2 x64, Windows 10 Home (all updates thru May 1)

   Finalizing a book with 15 chapters, each about 15 - 30 pages (total 505 pages in book). Have several different versions, in separate folders; all with same file names and book names. Recently discovered that some files in the "FINAL" folder had been overwritten with earlier versions.

   Is is sporadic and I have not been able to fully duplicatie. Looks like if A/chapter1 is open and then B/chapter1 is opened, A/chapter1 is overwritten with the content from B/chapter1. Something also occurs that causes A/chapter1 to get flagged as "possibly damaged" when next opened.

   I cannot tell if this occurs only… more

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Linked EPS appears with jagged/rough edges even on High Quality Display

   I've never seen this before, but linked vector EPS files aren't previewing properly in InDesign. The edges are super jagged when they should be smooth lines.

   •  

   •  

   3 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Need More Info  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   Please mention the version of InDesign you’re seeing this issue with.
   Also, if you could share a couple of sample EPS files, it would be great. Please send these to sharewithID@adobe.com

   —
   InDesign team

3. 17.0.1 crashes adding links

   Every time I try to add or change a link in the links panel, InDesign crashes.

   I restart InDesign and it tells my my file might be damaged. Do I still want to open it.

   I open it. All seems ok. Try to change a link again, and InDesign crashes.

   This is so frustrating!!

   3 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Preflight bug for non-proportional scaling glyphs text

   Still, I think it's either a bug with preflight or at least an unexpected behavior of the preflight function.
   Preflight had an error with the first insertion point after the auto bullet; not with a specific character.
   At least it says that the error is related to the bullet, but it is showing an insertion point only when I click to select the error on the page.

   FWIW: At least the individual information on the shown error is highly misleading.

   Problem is described here and ID sample with the problem available at this address: https://community.adobe.com/t5/indesign-discussions/new-problem-with-non-proportional-scaling/m-p/12903503#M474837

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Text/Story/Table  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Type 1 font warning on Macbook 13"

   The Type1 font warning doesnt fit macbook 13 screen. The CLOSE button doesnt appear. I have to switch to bigger screen resolution to see it.

   •  

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  UI/UI Scaling  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. User Interface half in English (default) and half in Russian

   When I go to my drop-down menu one of them is in Russian.

   The only issue I have found is with the dropdown under Type (English) > Text Variable (English) > Insert Veriable (Russian). Only in Russian on some documents I open, not all.

   I updated my InDesign to v 17.21 today.
   Using a MacBook Pro with MacOS Monterey v 12.3.1 (12-in, Apple M1 Chip, 2020).

   •  

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Performance/Usability  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Fonts defined in existing Paragraph / Character Styles Missing after Creative Cloud font type change

   VERSION: InDesign 2022 V 17.0.1

   We activated the Museo Sans Rounded font via Creative Cloud and have used it in our documents since 2015. Until recently, the font activated by CC had a font type of OpenType Type 1. This font is still available on CC, but its font type appears to have changed to OpenType True Type.

   Documents that used the OpenType Type 1 font in a Paragraph or Character style now show this font as missing. The missing font name now displays as Museo Sans Rounded (OTF) in Find / Replace fonts and Paragraph and Character Styles panels. The font type under Find / Replace fonts is OpenType Type 1.

   Documents that used the same OpenType Type 1 font without declaring it in a Paragraph or Character style synchronize successfully with the OpenType True Type font on CC and do not show up as missing. The font name displays as Museo Sans Rounded throughout the document. The font type under Find / Replace fonts is OpenType True Type.

   A CC library asset that used the OpenType Type 1 font can be dropped into a new blank document without producing any missing font errors. Paragraph and Character styles associated with the library asset display a font name of Museo Sans Rounded. The font type under Find / Replace is OpenType True Type.

   The same library asset shows the font as missing if dropped into a file with existing Paragraph or Character styles used by the asset. The font name displays as Museo Sans Rounded (OTF) in Find / Replace fonts and Paragraph and Character Styles panels. The font type under Find / Replace fonts is OpenType Type 1.

   VERSION: InDesign 2022 V 17.0.1

   We activated the Museo Sans Rounded font via Creative Cloud and have used it in our documents since 2015. Until recently, the font activated by CC had a font type of OpenType Type 1. This font is still available on CC, but its font type appears to have changed to OpenType True Type.

   Documents that used the OpenType Type 1 font in a Paragraph or Character style now show this font as missing. The missing font name now displays as Museo Sans Rounded (OTF) in Find / Replace fonts and Paragraph and Character Styles panels.… more

   •  

   •  

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Others  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. InDesign 2022 mising table strokes after opening the idml file

   After opening idml files in InDesign 2022 (v. 17.2) some table strokes are set to 0 pt while they should be stroked at 1 pt. There's no such issue with InDesign 2021 which opens the idml correct. Any ideas are welcomed.

   •  

   •  

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Text/Story/Table  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. Adobe InDesign 2022: Contents with multiple levels not in alphabetical order

   https://www.dropbox.com/s/mn8kzgd4hwvma64/bug%20report%20docs.zip?dl=0

   As you will see, "JED" is still the first alphabetized entry in the TOC.

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Book/TOC  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. Table of Contents problem on right-facing page on spread

    I use two levels of ToC (Main and sub headings). On right-facing pages in a spread, the main heading (TOC-1) appears below the sub-headings (TOC-2) in the Table Of Contents.

    Consider the two attached files. The page shown in Toc problem-1 is a right-facing page in the book. The Level 1 heading is "Audible Signals," and the three Level 2 subheads are "Train Whistle/Horn Signals, Train Buzzer Signals, and Tower Whistle/Horn signals. This SHOULD appear with Audible Signals as the top-level and the other three below it. On a LEFT FACING page it works correctly. On a right-facing page it does not. The second file, Bad TOC.jpg, shows what happens on a right-facing page. Two of the subheads get grouped with the previous section.

    The fix for this needs to be a Level-1 heading, on a right-facing page of a two-page spread, must always take precedence over Level 2 leadings.

    I use two levels of ToC (Main and sub headings). On right-facing pages in a spread, the main heading (TOC-1) appears below the sub-headings (TOC-2) in the Table Of Contents.

    Consider the two attached files. The page shown in Toc problem-1 is a right-facing page in the book. The Level 1 heading is "Audible Signals," and the three Level 2 subheads are "Train Whistle/Horn Signals, Train Buzzer Signals, and Tower Whistle/Horn signals. This SHOULD appear with Audible Signals as the top-level and the other three below it. On a LEFT FACING page it works correctly. On a right-facing page it… more

    •  

    •  

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Book/TOC  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. Italian Hyphenation

    Please see my thread (username: emarillo) at

    https://community.adobe.com/t5/indesign-discussions/wrong-italian-hyphenation/m-p/12771584

    thank you,
    Emanuele

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. Disable automatic sect-tags on PDF export

    When exporting a tagged PDF, InDesign automatically creates Sect-Tags for each story. I would like to be able to disable this feature on export for the following reasons:

    1. As far as I know, they are of limited value for screen reader users. The content is usually already well structured by means of an appropriate heading structure.
    2. It is very difficult to integrate figures into a story in a semantically correct/meaningful way. When anchoring them in the text, they will be nested in p-tags, which is according to PDF/UA not correct semantically. Hence, I avoid creating stories and use the article panel for setting up the reading order. This makes the sect-tags very redundant though.
    3. Often, pre-edits of the tagging in Acrobat Pro are necessary. All those Sect-tags bloat up the tagging tree unnecessarily and obfuscate the actual tagging structure. I want to be able to see heading and p tags without expanding large amounts of Sect-tags.

    For these reasons, I suggest to add a checkbox "Disable automatic creation of sect-tags" on export for interactive PDF.

    When exporting a tagged PDF, InDesign automatically creates Sect-Tags for each story. I would like to be able to disable this feature on export for the following reasons:

    1. As far as I know, they are of limited value for screen reader users. The content is usually already well structured by means of an appropriate heading structure.
    2. It is very difficult to integrate figures into a story in a semantically correct/meaningful way. When anchoring them in the text, they will be nested in p-tags, which is according to PDF/UA not correct semantically. Hence, I avoid creating stories and use the article… more
    5 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  PDF Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. Can't create snap to baseline style

    I just paid for and downloaded ID 17.2.1 after using cs6 and need to meet a deadline for a four page newsletter. I can't seem to find any buttons whatsoever that allow me to create a body style with the text snapping to the baseline. My text is all over the shop. Did I just do a faulty download, or am I missing something? Where is the option for baseline snapping or not snapping?

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Adjust Layout  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Need More Info  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    Align to Baseline Grid option is available in the Paragraph panel.

    It is also available in the Paragraph Style dialog under the Indents and Spacing section - Align to Grid.

    Hope you find this useful.

    --

    InDesign team

14. scroll arrows missing

    Here is a new bug in InDesign 2022
    This bug didn't exist in InDesign 2019
    Here isi it :
    In OBJECT menu > Object's layers options :
    The small window doesn't have scroll arrows anymore. They are very usefull to scroll the list screen per screen.
    Now, ther is only a vertical scroll cursor and it isn't precise at all : impossible to use with a list of 40, 50 layers.

    The window should be resizable too please.
    Thank you for reading

    •  

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Accessibility  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. test file

    it is not possible to upload .indd or .idml files.
    very good idea....

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. Missing or Damaged Links in 17.0.1

    Just opened file created two years ago in InDesign. Links panel shows links ok, but pages show gray rectangles. Replacing the link seems to help, except if the link is a PDF. Those are not working at all. They show up on screen as pixelated, even at high screen resolution setting; but print as gray rectangles.

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Scaling issues in Indesign 2022 17.02

    After innstalling the 17.2 version the page/artwork will no longer be shown in 100% on the screen. After deleting the version and going back to 17.1 the problem is solved.

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. Je souhaite une fonctionnalité d'historique sur Indesign comme sur Photoshop

    Création d'une fonction historique sur Indesign comme celle de Photoshop.

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Accessibility  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. historique

    Un panneau historique (comme dans Photoshop) serait intéressant dans Indesign.
    Ou au moins la possibilité de contrôler le nombre de CTRL + Z dans le logiciel

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  UI/UI Scaling  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. Document grid hiding guides

    When unchecking "Grids in back" in preferences>grids, the document grid hides all guides that are places on it.

    That is, if for instance I place a ruler guide at the 2mm mark, and it happens to fall on the document grid (or its subdivisions), it will not show.

    That is even when the guides are in a different color.

    This is extremely problematic, especially in cases where I want to have an image/solid color as a background for my spread, and I want to make use of the document grid and also specially placed guides.

    Please fix this, or at least make it an optional preference that we can uncheck.

    Thanks a lot,
    Alon

    When unchecking "Grids in back" in preferences>grids, the document grid hides all guides that are places on it.

    That is, if for instance I place a ruler guide at the 2mm mark, and it happens to fall on the document grid (or its subdivisions), it will not show.

    That is even when the guides are in a different color.

    This is extremely problematic, especially in cases where I want to have an image/solid color as a background for my spread, and I want to make use of the document grid and also specially placed guides.

    Please fix this, or at… more

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Document/Pages  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating