7048 results found

1. Correct UI Resolution for 4K Screens

   I have a 4K laptop (Dell XPS 15"), and the UI is just too small. Not small as in "I wish it was bigger", but rather "It is impossible to interact with the UI".

   From scrolling through forums and such, it seems that this problem exists since 2014 or so, when 4K screens where a rare sighting.
   But now these screens are becoming more popular, and the fact that they aren't supported by InDesign is pretty absurd. Especially when other programs (Photoshop, Illustrator, Premier etc.) work completely fine.

   I've seen suggestions for workarounds that have to do with setting the program DPI and the scaling that Windows does, but the only thing it does is stretch the UI to the point of bad pixelation and an overall bad experience.

   Thanks!

   I have a 4K laptop (Dell XPS 15"), and the UI is just too small. Not small as in "I wish it was bigger", but rather "It is impossible to interact with the UI".

   From scrolling through forums and such, it seems that this problem exists since 2014 or so, when 4K screens where a rare sighting.
   But now these screens are becoming more popular, and the fact that they aren't supported by InDesign is pretty absurd. Especially when other programs (Photoshop, Illustrator, Premier etc.) work completely fine.

   I've seen suggestions for workarounds that have to do with setting the… more

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Completed  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   UI Scaling feature (under Preferences) of InDesign 2022 should cater to this requirement.

   Please update to the new version of InDesign to get this feature.

   —
   InDesign team

2. Font name incorrect when a character style is applied

   If you make a character style that applies "Bold" (or some other font style) and then apply it to text, the font name changes incorrectly in the Font field of the Properties panel or Control panel.

   For example, if the character style applies "Bold" and you apply it to text set to Minion Pro, then the font name changes to "Minion Pro Bold" and the style also changes to Bold.

   This is incorrect. In older version of InDesign it worked correctly: The font name should stay "Minion Pro" and the style should change to "Bold"

   •  

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. Text frame options: Individual inset spacing when rounded corners are enabled

   Currently the text frame options do not allow different inset spacing on each side if a rounded corner is applied to the text frame.

   We are trying to create a template that has a text box with a gradient background and a rounded corner that bleeds off the page. We need to set the inset to push the inset spacing on one side further than the rest to fit within the page margins, but with the rounded corner this is not possible.

   •  

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Slow

   Ever since these latest updates to InDesign, the performance is slow even with Display Performance set to Fast. I looked through the RAM and made sure no other settings were making it lag. I've uninstalled and reinstalled with no difference in performance. There shouldn't be a need to update InDesign so frequently, I've used Adobe products for over 10 years and these updates are making the usability go backwards.

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Needing a smaller swatches panel (minimum 1 line, not 2 lines)

   Context : On most of my documents, with few but very distinct colors, I'll often switch to "big thumbnails". It's easy to distinguish a color from a lighter or darker version.

   But then, when the panel could displays two lines of swatches, I would only need one (see linked file), freeing a lot of screen space.

   Except the minimum size of that panel doesn't go under 2 lines, when 1 would be enough.

   •  

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Variable fonts broken with World Ready Paragraph Composer

   Using the World-ready composer essentially breaks the glyph width interpolation of Variable Fonts. The outcome is that text set in a Variable Font will receive the Variable Font's default style's horizontal glyph widths for any axis location, resulting in unusable overlap or gaps.

   Attached you find a sample Indesign file with comparison and a screenshot thereof. This happens with any Variable Font I have tested so var, but to complete the same test case as included, download https://github.com/adobe-fonts/source-sans-pro/releases/download/3.006R/source-sans-pro-3.006R.zip and install VAR/SourceSansVariable-Roman.otf as well as OTF/*.otf files.

   Link to Indesign file: https://www.dropbox.com/s/h8fpld7ks7k8rb4/bug-report-variable-font-world-ready-composer.indd?dl=0

   •  

   •  

   •  

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   5 comments  ·  Others  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Under Review  ·  amaarora responded

   Thanks for reporting the issue.
   We are reviewing it

   -InDesign Team

7. Glyphs automatically replaced with indesign 15.0.1 update

   After updating to version 15.0.1 indesign replaced automatically one of the glyphs of the Source Sans Pro font.
   If the same file is openend with a previous version of indesign, glyph returns to its original appearance.

   •  

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. Change font without changing style

   Assume that I have selected some text which contains instances of bold, italic, or other "styles" (not INDD "styles," but variations of a typeface within a specific font family).

   In previous versions of InDesign, I used to be able to change the typeface of the selected text, and maintain all instances of bold, italic, etc. In newer versions of InDesign, this is only possible when I navigate to the new font family by scrolling through the menu; when I search for a font family, I am presented with only the specific members of the family, not the family itself. This means that no matter which family member (roman, italic, etc) I choose, I will be losing for formatting already applied to the text. Please restore the ability to change the font without specifying a "style"/family member when choosing a typeface by typing its name into the font menu box. Thank you.

   If this is unclear, please let me know, and I'll answer any questions.

   Assume that I have selected some text which contains instances of bold, italic, or other "styles" (not INDD "styles," but variations of a typeface within a specific font family).

   In previous versions of InDesign, I used to be able to change the typeface of the selected text, and maintain all instances of bold, italic, etc. In newer versions of InDesign, this is only possible when I navigate to the new font family by scrolling through the menu; when I search for a font family, I am presented with only the specific members of the family, not the family itself. This… more

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   5 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. Bug with world ready composer when use space like thin en or em space in Thai language. And bug in text wrapping in 2020 version.

   After updated to 2020 version that added support to Asian languages (include Thai), it look like Indesign force user (in my case Thai) to set language in Advanced Character Formats to Thai. After set the language Indesign also require me to use World-Ready Composer to set all tone marks in place.
   .
   Before the latest version, I always avoid to use World-Ready Composer because it combines a word to single object, not just locks tone mark and float vowel to character in the right position. By which it impossible to navigate with text tool to the position of text that I want to revise, even if I use right/left key to navigate. It mostly skips word by word, not only character by character. And when I delete a word or a character, some time it not only deletes backward but forward too. (I think because of when I delete character form a word Indesign instantly recognises new word and forces to delete that new word.) But After updated to 2020, I think, I anymore cannot avoid World-Ready Composer.
   .
   After I designed to use World-Ready Composer, I found one more bug. Because in many situations when I craft the spacing in layout (especially in Thai), I always use thin-space to separate character like “ๆ” form word before and after to make the space between them look good. But After I set to World-Ready I found that when thin-space (include other spacial white space like en or em) is in the back of the line the spaces in question act like normal character, so the last character of the line when use left justify do not snap to right frame border. The space still there like It becames one of character. So you can see the gap between the last character and the right frame border. (you can find this instance in attachment in file “space issue.”)
   .
   But the serious issue still there after the update. I, and all of my co-workers, found that everything about word wrapping in Thai language goes wrong after updated to 2020 version. This never happen in the former versions. I don't understand why this issue is happen. Even if I use Discretionary Line Break to help Indesign to wrap text properly. But It is not productive at all, because I had been forced to read text all over again and to insert Discretionary Line Break to every lines. (you can find this instance in attachment in file “wrap gone wrong.” In the high-light is the words that should be stick together.)
   .
   PS. while I wrote this issue report, my co-worker tried to migrate back form 2020 to 2019 and she found that when copy revised text back to 2019 it not the same character encoding. I advised her to try to place that text to TextEdit. It appears that some character is changed to something that is not unicode at all. That never happen in previous versions too. ((you can find this instance in attachment in file “text form 2020” and “text form 2020.” the text form 2020 at frist did in 2019 before migrate to 2020.)

   After updated to 2020 version that added support to Asian languages (include Thai), it look like Indesign force user (in my case Thai) to set language in Advanced Character Formats to Thai. After set the language Indesign also require me to use World-Ready Composer to set all tone marks in place.
   .
   Before the latest version, I always avoid to use World-Ready Composer because it combines a word to single object, not just locks tone mark and float vowel to character in the right position. By which it impossible to navigate with text tool to the position of text that… more

   •  

   •  

   •  

   •  

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Text/Story/Table  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

   The fix for this issue is now available in the latest update of InDesign – that is, InDesign 15.0.2.

   Please update your InDesign application to get this fix.

   —
   Adobe InDesign team

10. Paragraph style bullets and numbering Arabic incorrect display Indesign 2020

    Latest Indesign 2020
    When specifying an Arabic string for Number in paragraph style Bullets and Numbering, the string does not display correctly. Every letter is connected to the letter to the right rather than the letter to the left.

    The wrong behavior is not present in Indesign 2019.

    •  

    •  

    •  

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    4 comments  ·  Styles  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    Fix for this issue is now available in the latest update of InDesign 2020 – that is, InDesign 15.0.1

    In the Creative Cloud Desktop application, click on the Updates section on the left. You should be able to see the Update available for InDesign. Please update your InDesign application to this version to try out the fix.

    Let us know in the comments section if you face any problem with the updation process.

    —
    Adobe InDesign Team

11. Indents incorrect when importing Word document

    When importing a Word document that contains some indented paragraphs, the left indent being set to 5mm in Word (for example), once placed in InDesign, these 5mm indents typically show as 4.992mm. This would not neccesarily be a problem except that Find/Change in InDesign will not recognise an indent to 3 decimal places and therefore this cannot be located easily and fixed. This is proving to be a big problem in my workflow as I cannot automate the process of re-styling these paragraphs using InDesign Paragraph Styles with Find/Change. This bug occurs whatever measurement system is used, i.e. mm, inches, pts etc. Version of InDesign used: 14.0.3 although the same problem exists back to CS6 at least.

    When importing a Word document that contains some indented paragraphs, the left indent being set to 5mm in Word (for example), once placed in InDesign, these 5mm indents typically show as 4.992mm. This would not neccesarily be a problem except that Find/Change in InDesign will not recognise an indent to 3 decimal places and therefore this cannot be located easily and fixed. This is proving to be a big problem in my workflow as I cannot automate the process of re-styling these paragraphs using InDesign Paragraph Styles with Find/Change. This bug occurs whatever measurement system is used, i.e. mm, inches,… more

    • 

    •  

    •  

    •  

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Under Review  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    Thanks for reporting this issue.
    We are going to review it shortly.

    —
    Adobe InDesign team

12. I can't open any file after upgrading to Catalina 15.10.1

    Yesterday I switched from Mojave to the new version of MacOS Catalina (15.10.1), and InDesign CC 2019 (updated to version 14.0.3) immediately after switching to the new operating system started to no longer open the files, either from the "Open file" both by double clicking on the file (I also tried to open the files as a copy, but InDesign also crashes in that case).
    Point out that I also tried uninstalling InDesign and erasing all preferences, but the situation is not solved.
    I kindly ask you to resolve the situation (which is not the downgrade to the old Mojave system) as soon as possible because I cannot work in this situation.
    My Mac is an iMac 4,2 GHz Intel Core i7 quad-core (16 GB 2400 MHz DDR4)
    Thank you in advance, Niki

    Yesterday I switched from Mojave to the new version of MacOS Catalina (15.10.1), and InDesign CC 2019 (updated to version 14.0.3) immediately after switching to the new operating system started to no longer open the files, either from the "Open file" both by double clicking on the file (I also tried to open the files as a copy, but InDesign also crashes in that case).
    Point out that I also tried uninstalling InDesign and erasing all preferences, but the situation is not solved.
    I kindly ask you to resolve the situation (which is not the downgrade to the old Mojave… more

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminRavi Kiran (Admin, Adobe InDesign) responded

    Fix for this issue is now available in the latest update of InDesign 2020 – that is, InDesign 15.0.2

    In the Creative Cloud Desktop application, click on the Updates section on the left. You should be able to see the Update available for InDesign. Please update your InDesign application to this version to try out the fix.

    Let us know in the comments section if you face any problem with the update process.

    —
    Adobe InDesign Team

13. crash

    Very often when trying to save as InDesign is crashing making me lost my un saved work.

    I can't attach a file since my computer crash...

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    CLOSED  ·  amaarora responded

    To identify the cause of this issue, we had started our investigation with the aim to resolve it. You might have also received email from us seeking more details to help in our investigation.

    We’ve concluded our investigation and came up with the finding : Either the issue is fixed in the latest release of InDesign or the issue was intermittent in nature at the time of its reporting and is not reproducible now.

    We recommend you to upgrade to the latest version of InDesign 2020 (if you’re not already on it). It contains a lot of stability fixes.

    If you still face this issue even after updating to the latest version of InDesign, please submit the crash report to us. (The guidelines to submit crash are available at (https://helpx.adobe.com/indesign/kb/submit-crash-reports.html)
    We seek your support in our continual effort to improve InDesign.

    —
    Adobe InDesign Team

14. InDesign freezes while Adding New/Editing Cross-References

    1. InDesign 13.1 x64 2a. Select the text, go to Insert Cross References either via Type > Hyperlinks & Cross References or via the Cross References Panel. 2b. Select text that already has a cross reference, go to Cross-Reference Options either via Type > Hyperlinks and Cross References of the Cross References panel.
    2. The New Cross-Reference or Edit Cross-Reference dialog box should open and function.
    3. InDesign freezes and has to be force quit. I've waited as long as 20 minutes for the system to function properly before having to force it to quit.

    •  

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    6 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Closed: Fixed  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    Hi,
    As confirmed by the user, the issue is resolved with the latest InDesign.

    —

    Adobe InDesign Team

15. Open Asset Plugin window keeps opening up even though I keep shutting it. It continuously interrupts my flow.

    The Open Asset plugin for Indesign continuously pops up. I don't use it. I don't want to use it. I want it to stop popping up and interrupting my workflow. If I close the window, it should stay CLOSED.

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    8 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. Running head containing forced line break inserts space incorrectly

    When a Running Head text variable is generated, under certain (common) conditions, a double-space is inserted where a forced linebreak is used.

    To reproduce bug:

    1. Insert a Running Head text variable into a master page running head position.

    2. Specify the first instance of, say, Level-One paragraph style.

    3. In a multi-page text flow, insert a Level-One styled paragraph with enough text to force a line wrap.

    4. Within the Level-One paragraph, insert a Forced Line Break (FLB) character.

    5. Scroll text back and forth to force update of the text variable display.

    Result: On the page containing the Level-One paragraph, the running head will display a space where the FLB would be. On subsequent pages, the running head variable is expanded with NO space in that position.

    If you ADD a space in the Level-One paragraph, before or after the FLB, the first instance of the Running Head variable will contain TWO spaces, and subsequent instances will contain only ONE space.

    Thus, there is no viable work-around for this bug.

    I have attached a file illustrating the problem in a Spread layout. Note that if the first instance of the Level-One style is on the left-hand page (and the running head is on the right-hand page), the problem does not occur.

    When a Running Head text variable is generated, under certain (common) conditions, a double-space is inserted where a forced linebreak is used.

    To reproduce bug:

    1. Insert a Running Head text variable into a master page running head position.

    2. Specify the first instance of, say, Level-One paragraph style.

    3. In a multi-page text flow, insert a Level-One styled paragraph with enough text to force a line wrap.

    4. Within the Level-One paragraph, insert a Forced Line Break (FLB) character.

    5. Scroll text back and forth to force update of the text variable display.

    Result: On the page containing the Level-One paragraph, the running head… more

    •  

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Google sheets in xlsx but still "Cannot place... no filter..."

    I try to place a spreadsheet created in Google sheets and saved as xlsx and I get the error message "Cannot place this file. No filter found for requested operation". I am using a Mac & Mojave 10.14.6. My copy of InDesign is subscription.

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Others  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. Mongolian

    Issue: InDesign does not support Mongolian vertical text direction from left-to-right.

    Version: InDesign 2019, 14.0.2 x64

    Steps:
    1. Place or paste Mongolian text into an InDesign text frame by using the attached Word document
    2. Skew the text frame 90 degrees (as done with vertical Chinese and Japanese).

    Expected result: Please see the attached Word document and screenshot.

    Actual result: Notice that the vertical text direction is right-to-left and not left-to-right. Even if the text frame is skewed in the opposite direction (minus 90 degrees) the text is just mirrored and thus not readable.

    Test files and screenshot: They are attached. If need be you can download the Google Noto font called Noto Sans Mongolian that we used.

    Issue: InDesign does not support Mongolian vertical text direction from left-to-right.

    Version: InDesign 2019, 14.0.2 x64

    Steps:
    1. Place or paste Mongolian text into an InDesign text frame by using the attached Word document
    2. Skew the text frame 90 degrees (as done with vertical Chinese and Japanese).

    Expected result: Please see the attached Word document and screenshot.

    Actual result: Notice that the vertical text direction is right-to-left and not left-to-right. Even if the text frame is skewed in the opposite direction (minus 90 degrees) the text is just mirrored and thus not readable.

    Test files and screenshot: They are… more

    •  

    • 

    •  

    • 

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. idml shifts images in bounding boxes

    PLEASE FIX THIS.

    We send both indd and idml file formats to asian print suppliers. depending on the adobe version the supplier is using we are finding images can shift within bounding boxes - cutting them off at the crop. Or text frames reduce – cutting off copy. This is an incredibly expensive discovery if it not caught in pre-press.

    My team is sending hundreds of files a year to Asian printer suppliers. this bug occurs in about 1 out of a hundred files.

    PLEASE FIX THIS.

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  IDML Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. Bugs with GPU, Bugs without GPU (zoom, moving objects, create text)

    (Working on Adobe InDesign 14.0.2.)

    Hi there,

    so for a couple of weeks, my Indesign behaves quite badly.
    For demonstration purposes, I created a new blank file but these bugs also occur in existing work projects.

    Case 1: GPU switched on (Image: GPU on):
    Zooming does not show any effect, only when I click in and change something. The rulers change, but my board/document is not zooming in (Video: Zooming with GPU). As soon as I found my page, the objects don't really move that well, more in a lagging, stocking way. (Video: Moving Objects with GPU).

    This leads to massive pain when you try to work fluently.

    Case 2: So I switched GPU off (Image GPU off):
    This helped with the zoom, it worked again. But then creating objects, for example, text, totally lagged in showing the content. Creating a new text field and typing anything in it leaves it completely blank until I choose a different tool or click outside the box. Also moving those objects does not happen in real time and does not show any preview. (Video: Type and Move without GPU)

    This, too, makes it really hard to build any kind of fluent workflow right now.

    I uninstalled and installed InDesign and Creative Cloud repeatedly. Other applications don't seem to be affected (Photoshop, Illustrator, XD).

    So. Any suggestions?

    When I now need to do things in InDesign, I have to give it away to a colleague or use his Computer. Could it also be something with the internal graphics? But why do all other apps work so well then and it's only InDesign behaving badly.

    Thank you very much!

    (Working on Adobe InDesign 14.0.2.)

    Hi there,

    so for a couple of weeks, my Indesign behaves quite badly.
    For demonstration purposes, I created a new blank file but these bugs also occur in existing work projects.

    Case 1: GPU switched on (Image: GPU on):
    Zooming does not show any effect, only when I click in and change something. The rulers change, but my board/document is not zooming in (Video: Zooming with GPU). As soon as I found my page, the objects don't really move that well, more in a lagging, stocking way. (Video: Moving Objects with GPU).

    This leads to… more

    • 

    •  

    • 

    • 

    •  

    •  

    6 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating