7156 results found

1. Issue Report: Kerning Not Applied with Ligatures Enabled in InDesign 2024/2025 (Regression from 2023

   Description:
   A kerning issue occurs in Adobe InDesign 2024 and 2025 when using ligature-supported fonts like Microsoft Uighur Font. Manual kerning adjustments fail to apply when ligatures are enabled. This problem does not occur in InDesign 2023, where disabling ligatures allows kerning to function as expected.

   ---

   Steps to Reproduce:
   1. Font Setup: Use Microsoft Uighur Font in InDesign 2024/2025. (I use my personal font)
   2. Text Input: Type a word containing the ligature اللہ (e.g., any two Arabic text).
   3. Enable Ligatures: Ensure ligatures are turned on (Character panel > Ligatures: ON).
   4. Apply Manual Kerning: Attempt to adjust kerning between characters (e.g., using Alt + Arrow Keys).
   - Observed Result: Kerning adjustments do not take effect.
   5. Disable Ligatures: Turn ligatures off (Character panel > Ligatures: OFF).
   - Observed Result: Kerning now works as expected.

   Expected Behavior:
   Manual kerning should apply regardless of ligature settings, as seen in InDesign 2023.

   Affected Versions:
   - Broken: InDesign 2024 & 2025
   - Working: InDesign 2023

   ---

   Request for Assistance:
   Has anyone encountered this regression? Are there known fixes or workarounds for newer InDesign versions? Testing with Microsoft Uighur Font and the ligature اللہ should replicate the issue. Any guidance or insights would be appreciated!

   (Note: Ensure OpenType features are not overriding settings, and test in a new document with default preferences.)

   Description:
   A kerning issue occurs in Adobe InDesign 2024 and 2025 when using ligature-supported fonts like Microsoft Uighur Font. Manual kerning adjustments fail to apply when ligatures are enabled. This problem does not occur in InDesign 2023, where disabling ligatures allows kerning to function as expected.

   ---

   Steps to Reproduce:
   1. Font Setup: Use Microsoft Uighur Font in InDesign 2024/2025. (I use my personal font)
   2. Text Input: Type a word containing the ligature اللہ (e.g., any two Arabic text).
   3. Enable Ligatures: Ensure ligatures are turned on (Character panel > Ligatures: ON).
   4. Apply Manual Kerning: Attempt to adjust kerning… more

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Text/Story/Table  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. InDesign 2025 Crashing Constantly

   Indesign 2025 has been crashing consistently since I updated it. The main trigger seems to be when you Option-drag any element. Text, image, shape. It immediately crashes. Any designer knows option-drag is a standard move for design work. This is very problematic. I have restarted, reinstalled, updated OS but still the same thing happens. Sometimes it now crashes when you PDF anything. Update has some serious glitches. Needs fixing asap.

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Need More Info  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   We have released InDesign 2025(v20.2.0.036) with many stability fixes. We recommend you upgrade to the latest version (if you’re not already on it) as it is more robust.

   If you still face this issue even after updating, please submit the crash report to us. (Guidelines to submit crash are available at (https://helpx.adobe.com/indesign/kb/submit-crash-reports.html )

   Also, please send the following information to santalwa@adobe.com :

   • Reproducible Steps – What were you doing when InDesign crashed?
   • Video recording of the crash
   • Is(Are) the issue related to a specific document(s)/asset(s)? If yes, could you provide us with the document(s)/asset(s)? Please package the entire document (To package the document, choose File → Package…)

   —

   Adobe InDesign Team

3. [ID-4261037] JavaScript is not working in InDesign 20.2.0

   allow me to get a version of 20.1 from the cloud until you fix the problem

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Resolved For User  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   We tried executing the script shared by you at our end and found that the extension you are using for the script should be ".scpt"(applescript) and not".jsx"(javascript). Please try changing the extension of your script to ".scpt".

   —

   Adobe InDesign Team

4. overlapping text on paragraph break in INDD

   When formatting text using a parent page element that's been activated (by using Shift + CMD + Click) on a page, and forcing a paragraph break so that the text goes from two lines to three, the first of the now three lines "hides" behind the second line. The current fix to this issue is to make an edit to the first line so it "pays attention" to the change and goes where it's supposed to.

   Font used: Los Feliz OT, Bold, 27
   Justification: Bottom

   Screenshots included of before the edit, during the edit, and fixed, with hidden characters turned on.

   When formatting text using a parent page element that's been activated (by using Shift + CMD + Click) on a page, and forcing a paragraph break so that the text goes from two lines to three, the first of the now three lines "hides" behind the second line. The current fix to this issue is to make an edit to the first line so it "pays attention" to the change and goes where it's supposed to.

   Font used: Los Feliz OT, Bold, 27
   Justification: Bottom

   Screenshots included of before the edit, during the edit, and fixed, with hidden characters turned… more

   •  

   •  

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Text/Story/Table  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Stop screwing with my workspace settings

   How about app settings like Preferences and Workspace Settings live in the CC profile and it just lives in the cloud? Because you guys can't seem to do the "Retain current settings" thing ever, you have the option and the option never works. Not ONCE, ever.

   NOBODY WANTS THE ESSENTIALS WORKSPACE.

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Constantly forgetting Workspace setting

   InDesign 20.1, as well as pretty much every version since 2019 continually forget my WorkSpace setting, so that when I boot ID, it randomly thinks I'm new, and so it loads the annoying popups and product tours and the almost ubiquitous blue alert at the bottom helping me with saving my settings.

   Fix this.

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Performance/Usability  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Indesign 20.1 There is a delay in moving picture/text box

   Clicking on a text box takes about 5/6 seconds before it selects it to move it.

   6 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Adjust Layout  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   Need More Info  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

   We have released InDesign 2025(v20.2.0.036) with performance and stability fixes. We recommend you upgrade to the latest version (if you’re not already on it) as it is more robust.

   If you still face this issue even after updating, please send the following information to santalwa@adobe.com :

   a. Please share your OS version and machine configuration

   • To save your Mac's system configuration, open the "About This Mac" window, select "System Report," and then choose "File" > "Save" to export a detailed system information file that captures your current settings; you can name and save it to a location on your Mac for future reference. 

   b. Steps to Collect Windows System Information

   • Type System Information in the search bar.
   • Double-click the System Information app.
   • Click File. Click Save.
   • Name the file. Save the file to the Downloads folder. Click Save.

   c. Reproducible Steps – What workflow are you experiencing performance issues in?

   d. Video recording of the issue

   e. Is(Are) the issue related to a specific document(s)/asset(s)? If yes, could you provide us with the document(s)/asset(s)? Please package the entire document (To package the document, choose File → Package…)

   f. Screenshot of Memory usage while the issue is observed

   e. Please follow the below steps on the Macintosh

   • Open Terminal in full-screen mode
   • Drag the InDesign application on the terminal (e.g. “/Applications/Adobe\ InDesign\ 2025/Adobe\ InDesign\ 2025.app/Contents/MacOS/Adobe\ InDesign\ 2025”)
   • Copy the logs when you start facing the slowness in a text(.txt) file. Share the file with us.

   —

   Adobe InDesign Team

   We have released InDesign 2025(v20.2.0.036) with performance and stability fixes. We recommend you upgrade to the latest version (if you’re not already on it) as it is more robust.

   If you still face this issue even after updating, please send the following information to santalwa@adobe.com :

   a. Please share your OS version and machine configuration

   • To save your Mac's system configuration, open the "About This Mac" window, select "System Report," and then choose "File" > "Save" to export a detailed system information file that captures your current settings; you can name and save it to a location on your Mac for future reference. 

   b. Steps to Collect Windows System Information

   • Type System Information in the search bar.
   • Double-click the System Information app.
   • Click File. Click Save.
   • Name the file. Save the file to the Downloads folder. Click Save.

   c. Reproducible Steps – What workflow are you experiencing performance issues in?

   d. Video recording of… more

8. table of contents

   I have InDesign Mac 20.1. I have a Book consisting of 3 documents. In the documents there are Figure captions in Minion Pro font. When I have an N-rule (option hyphen) in Caption and I create a table of contents (ToC) the N-rule becomes superscript Stempel Garamond LT Std in the ToC even though the caption style is Minion Pro

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Book/TOC  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. Skewed Images when opening saved file

   After I make an InDesign document, if I don't make a PDF copy before quitting out of InDesign, the entire document containing placed images and text is lost when I quit out of it. Having the PDF allows me to see what I had done in InDesign, but I can't of course update or alter the PDF.

   I tried tossing out the preferences (shift+control+opt+command (mac) while launching InDesign) and it didn't change anything, it's still giving me skewed images.

   Any idea why this is happening, and how to fix it? I don't even know what to call it. It's a rather new problem, and it's affecting even old InDesign Documents that were not having this issue when they were created.

   My InDesign is up to date (version 20.1) running on a Mac (version 12.7.6)

   After I make an InDesign document, if I don't make a PDF copy before quitting out of InDesign, the entire document containing placed images and text is lost when I quit out of it. Having the PDF allows me to see what I had done in InDesign, but I can't of course update or alter the PDF.

   I tried tossing out the preferences (shift+control+opt+command (mac) while launching InDesign) and it didn't change anything, it's still giving me skewed images.

   Any idea why this is happening, and how to fix it? I don't even know what to call it. It's a… more

   •  

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Others  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. Book Preflight panel uses [Basic] preflight profile instead of the indicated working profile

    Hello,

    i noticed some strange behaviour of the Book Preflight panel. While it shows the current working preflight profile as selected, it will instead use InDesigns [Basic] preflight profile. To actually use your desired preflight profile, you have to open the list of profiles and select it (again). Even though it already shows as selected.

    To reproduce this error, i duplicated the [Basic] preflight profile, named it "Test Check" and additionally disallowed RGB color under COLOR > Color Spaces and Modes Not Allowed > RGB. I then selected it as working profile in the preflight settings.

    I then set up a 4 page book file, consisting of 4 seperate InDesign documents, one of them containing an RGB filled object. When i open the books preflight panel, it shows the previously set up working profile as a selected, but won't use it. It will use InDesigns [Basic] profile, which doesn't contain the RGB color check. So the documents all finish checking with no errors.

    Only when i open the books preflight panel a second time, the actually used [Basic] profile shows up as selected. And when i select my actually desired profile, the check finishes as expected.

    Some additional notes for the first "phase", when my working profile shows up wrongly as selected:

    I can click the (already activated) radio button next to it and suddenly the [Basic] profile will show up.

    If i didn't do the above step, i can use the profile drop down and select my (already selected) working profile, and then InDesign will actually use it.

    Link to my test files:
    https://www.dropbox.com/s/11svsbbmvawdtt2/Book%20Preflight%20Test.zip?st=t042y5tm&dl=0

    This isn't a new error, by the way. I encountered first in InDesign 2022. I just upgraded to 2025, this time without importing any previous preferences, so i'm now sure this is an actual bug.

    Hello,

    i noticed some strange behaviour of the Book Preflight panel. While it shows the current working preflight profile as selected, it will instead use InDesigns [Basic] preflight profile. To actually use your desired preflight profile, you have to open the list of profiles and select it (again). Even though it already shows as selected.

    To reproduce this error, i duplicated the [Basic] preflight profile, named it "Test Check" and additionally disallowed RGB color under COLOR > Color Spaces and Modes Not Allowed > RGB. I then selected it as working profile in the preflight settings.

    I then set up… more

    •  

    •  

    •  

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Book/TOC  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. ID incorrectly enables Overprint when converting a text to paths

    This bug has been reproduced in Indesign 15.0 and 18.5. MacOS Sonoma.

    When you convert a BLACK text to outline, Overprint Fill is automatically enabled in the Attributes panel. The ‘Overprint’ selection remains applied even if you change the colour of this object.

    I've just had a print advert blown out of the water by my client because half of his logo had disappeared. It was blue and was overprinted even though I hadn't set anything like that.

    It came about in the way described above: a text was converted into paths, the resulting logo was recoloured in blue - but it remained an object for Indesign to print over.

    This bug has been reproduced in Indesign 15.0 and 18.5. MacOS Sonoma.

    When you convert a BLACK text to outline, Overprint Fill is automatically enabled in the Attributes panel. The ‘Overprint’ selection remains applied even if you change the colour of this object.

    I've just had a print advert blown out of the water by my client because half of his logo had disappeared. It was blue and was overprinted even though I hadn't set anything like that.

    It came about in the way described above: a text was converted into paths, the resulting logo was recoloured in blue -… more

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Effects/Transparency  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. InDesign Kerning Bug – Incorrect Character Spacing Display

    I have a bug to report in InDesign (possibly Illustrator). I have already addressed this issue in the community forum, where it has been confirmed by others, so it is not just affecting me:
    https://community.adobe.com/t5/indesign-discussions/indesign-kerning-bug-de-en/m-p/15187583/thread-id/613697#M613832

    There are display errors when adjusting kerning, making precise work impossible. (Kerning is intended for fine-tuning.) When setting the kerning between two characters, the spacing of other characters also visually changes. Please refer to the video for details.

    This issue occurs with both optical and metric kerning, at all zoom levels, on Windows 11 and Windows 10. Even setting the display to high quality does not resolve the issue.

    I have a bug to report in InDesign (possibly Illustrator). I have already addressed this issue in the community forum, where it has been confirmed by others, so it is not just affecting me:
    https://community.adobe.com/t5/indesign-discussions/indesign-kerning-bug-de-en/m-p/15187583/thread-id/613697#M613832

    There are display errors when adjusting kerning, making precise work impossible. (Kerning is intended for fine-tuning.) When setting the kerning between two characters, the spacing of other characters also visually changes. Please refer to the video for details.

    This issue occurs with both optical and metric kerning, at all zoom levels, on Windows 11 and Windows 10. Even setting the display to high quality does… more

    • 

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Text/Story/Table  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. [ID-4260604] InDesign with Typeface app is going in Protective Shutdown on document close

    Customer Scenario1

    Brand new Indesign 20.2: open any document, change nothing in it and close it. Indesign gives a warning and then crashes.
    MacOS 15.3.1 (24D70), Macstudio M2, I have reset all personal prefs, I am using Typeface app. This didn't happen with 20.1

    Customer Scenario2

    Doing a data merging of a .CSV file.

    Result

    InDesign is going in Protective Shutdown for few scenarios

    Workaround

    • Deactivate the Typeface app and continue to work with InDesign v20.2.0.36
    • Rolling back to InDesign 20.1.0.71 to continue to work with the Typeface app

    • 

    •  

    • 

    •  

    • 

    •  

    • 

    •  

    26 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    19 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Closed: Fixed  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    The fix of the issue is now available in the latest InDesign 2025(v20.3.0.060). We recommend you upgrade to the latest version for the fix.

    If you are unable to see the update, go to the Creative Cloud application click on the context menu on the top right, and click on Check for App Updates.

    —

    Adobe InDesign Team

14. Keyboard Shortcuts don't work after opening from Bridge with only one InDesign file open

    Very specific bug this but as Bridge sits at the centre of my workflow it affects every file I open!

    Steps to reproduce:
    1) Open InDesign
    2) Open a file from Bridge - right click, open or double click (keyboard shortcuts work fine the first time!)
    3) Close file in InDesign
    4) Open a file from Bridge as above

    Now most keyboard shortcuts - eg. Place: ctrl-D - won't work. Holding space gives you the temporary hand tool but that's about it. You have to hit alt-tab twice to get back to normal shortcuts working.

    If you open another file in the same way, shortcuts seem to work again.

    If you open from File Explorer they work as expected.

    If you open from the recent files thumbnails inside InDesign they seem to work fine.

    If you drag from Bridge, focus seems to stay on Bridge - keyboard shortcuts affect it instead. But that doesn't seem to be what's happening with the open command here... the shortcuts just seem to disappear into the ether!

    System:
    + Windows 10 Pro 64-bit 22H2 / Ryzen 9700x / 64GB / RTX 4800 Super / 990 Pro / Wacom PTH-851 - latest drivers/firmware for everything.
    + InDesign 20.1 but it's long standing behaviour - been like this through as many point releases / versions of Windows 10 as I can remember.

    Very specific bug this but as Bridge sits at the centre of my workflow it affects every file I open!

    Steps to reproduce:
    1) Open InDesign
    2) Open a file from Bridge - right click, open or double click (keyboard shortcuts work fine the first time!)
    3) Close file in InDesign
    4) Open a file from Bridge as above

    Now most keyboard shortcuts - eg. Place: ctrl-D - won't work. Holding space gives you the temporary hand tool but that's about it. You have to hit alt-tab twice to get back to normal shortcuts working.

    If you open another file… more

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Performance/Usability  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. I can’t permanently close the suggestion window. Every time I tap on an image, it reappears, and it’s really annoying. Can you help me? I pr

    just put a button don't show again, please.

    •  

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Others  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. InDesign crashes when updating review link

    InDesign Version: 20.1
    OS: macOS Sequoia 15.3.1
    Device: MacBook Pro (14in 2021)
    Memory: 32G
    Chip: Apple M1 MAX

    I regularly update a large file. Any time I try to update the Share for Review link, InDesign crashes. In smaller files, I receive an error message saying, "There was an error updating the artifact." The link will successfully update, but not without crashing or errors.

    4 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Share for Review  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Workspace is still resetting every document. Latest Update has not fixed this yet

    Workspace is resetting every time I open a new document. I received a notification from Adobe that this has been fixed. I've updated and it is not fixed.

    13 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    7 comments  ·  UI/UI Scaling  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Need More Info  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    We have released InDesign 2025(v20.2.0.036) with many bug fixes. We recommend you upgrade to the latest version (if you’re not already on it) as it is more robust.

    If you still face this issue even after updating, please send the following information to santalwa@adobe.com :

    • Reproducible Steps – What were you doing when the issue occurred?
    • Video recording of the issue?
    • Is(Are) the issue related to a specific document(s)/asset(s)? If yes, could you provide the document(s)/asset(s) to us? Please package the entire document (To package the document, choose File → Package…)

    —

    Adobe InDesign Team

18. drag and drop + option key (for objects and pages) crashes ID

    since the update 20.1, drag and drop + option key crashes InDesign. sometimes, while duplicating a box. sometimes, trygin to duplicate a page (as seen in the attachment).

    version: 20.1

    • 

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Crash/Freeze/Hang  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Need More Info  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    We have released InDesign 2025(v20.2.0.036) with many stability fixes. We recommend you upgrade to the latest version (if you’re not already on it) as it is more robust.

    If you still face this issue even after updating, please submit the crash report to us. (Guidelines to submit crash are available at (https://helpx.adobe.com/indesign/kb/submit-crash-reports.html )

    Also, please send the following information to santalwa@adobe.com :

    • Reproducible Steps – What were you doing when InDesign crashed?
    • Video recording of the crash
    • Is(Are) the issue related to a specific document(s)/asset(s)? If yes, could you provide us with the document(s)/asset(s)? Please package the entire document (To package the document, choose File → Package…)

    —

    Adobe InDesign Team

19. Make it possible to paste a color code containing a # character

    Please make it possible to paste a HEX color text string containing a hash character (e.g. "#ffffff"), into the the small text box in the color panel.
    At least on Mac, it is not possible in Indesign 20.1. Very annoying.

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Colors/Swatches  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. 1:1 print size zoom scale please !

    Please add a feature to select/setup a 1:1 screen to print scale, so that the 100% zoom can display the document at "real life" output size. (both on computer and monitor, hence the need for a personalized setup for different monitors)
    This could ideally be saved, the same way worskpaces can be saved.
    Thank you !

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Adjust Layout  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating