Adobe InDesign: Feature Requests
When entering a new feature request, please provide:
1. Description
2. Why is this valuable to you?
Thank you.
- or
No existing idea results
- ~ No ideas found ~
5241 results found
-
Change label for "Use Document Bleed Settings" to "Use Active Document's Bleed Settings"
When exporting a book under Export Adobe PDF > Marks and Bleeds > Bleed and Slugs, it would be helpful (for other users to avoid the frustration of learning the hard way as I just did) to know that this setting uses the active document's settings rather than each document's respective settings (Guessing this is a limitation with how PDF is constructed, otherwise is this perhaps actually a bug?), or if no document is active that it will apply all zeros.
The latter was the problem I encountered and was not expecting, as every document in my book has the same bleed settings (as I assume is the case for most users). Because I happened to have a document open for the last hundred or so exports I became accustomed to this feature setting bleed as expected, and so this was no longer on my manual checklist and consequently didn't realize the bleeds were set to zero until receiving my print proof (as I knew this was likely my final export I started to tidy everything up including closing all my active windows).
Perhaps I'm missing something obvious, otherwise I think there's a very simple change that could be made that might save others this potential frustration, which is to merely change the checkbox label to "Use Active Document's Bleed Settings", and ideally disable the option if no documents are active.
Thank You.
Edit: Perhaps a bug after all, or at least related to one?... now when I use the setting, with an open document (which has correct bleed, and whose values are entered into the four disabled value inputs), the export still has no bleed. Setting those same values manually worked. Maybe just get rid of this feature (the "use document bleed settings" checkbox)? Cheers.
When exporting a book under Export Adobe PDF > Marks and Bleeds > Bleed and Slugs, it would be helpful (for other users to avoid the frustration of learning the hard way as I just did) to know that this setting uses the active document's settings rather than each document's respective settings (Guessing this is a limitation with how PDF is constructed, otherwise is this perhaps actually a bug?), or if no document is active that it will apply all zeros.
The latter was the problem I encountered and was not expecting, as every document in my book has the…
1 vote -
AUTOMATIC EXPORT INDISGN CC PERPAGE BASED ON CONTENT OR FILE ALREADY
AUTOMATIC EXPORT INDISGN CC PERPAGE BASED ON CONTENT OR FILE ALREADY
1 vote -
Zip Fonts When Packaging
It would be great if there was an option to have fonts collected in a zip file when packaging a document. Fonts are often corrupted when transferred via the cloud, or FTP, and need to be zipped to maintain their integrity. It would be time saving if InDesign could do this automatically.
1 vote -
Support variable fonts without STAT.AxisValue format 2
When a variable font has one file for Roman and another one for Italic, the VF sliders only work if the STAT.AxisValue is in format 2.
STAT.AxisValue format 1 or 3 works in Illustrator 2020 and also in Photoshop 2020 if the font has a nameID 25 and postscriptNameID attributes for fvar.NamedInstance (a bit weird since Illustrator is fine without that).
If the files have only nameID 25 and postscriptNameID but the various STAT.AxisValue aren't in format 2, the named instances work in InDesign, but not the sliders: you can't choose an arbitrary value reliably.
Adobe obviously likes to make VF with STAT.AxisValue in format 2, but it would be nice if InDesign works well with fonts from other vendors, done differently. For example, since the end of June, new VF releases at Google Fonts have nameID 25 and postscriptNameID, and good STAT table (but no AxisValue in format 2). Could you check some fonts, like Bitter[wght].ttf and Bitter-Italic[wght].ttf https://github.com/google/fonts/tree/master/ofl/bitter and make sure they work well in InDesign (they already work well in Illustrator and Photoshop)?
When a variable font has one file for Roman and another one for Italic, the VF sliders only work if the STAT.AxisValue is in format 2.
STAT.AxisValue format 1 or 3 works in Illustrator 2020 and also in Photoshop 2020 if the font has a nameID 25 and postscriptNameID attributes for fvar.NamedInstance (a bit weird since Illustrator is fine without that).
If the files have only nameID 25 and postscriptNameID but the various STAT.AxisValue aren't in format 2, the named instances work in InDesign, but not the sliders: you can't choose an arbitrary value reliably.
Adobe obviously likes to make…
1 vote -
Style de paragraphe > option d'enchainement
option d'enchainement solidaire avec le paragraphe suivant également serait efficace. J'aimerais pouvoir lier un titre au paragraphe texte qui le suit
1 vote -
Keyboard command for resizing content within a picture box
Quark allows one to resize an image within a picture box using key commands. Could this key command please be added to ID. It's wonderful: To resize a picture in 5% increments using keyboard shortcuts, press Command+Option+Shift+> (Mac OS) or Ctrl+Alt+Shift+> (Windows). To enlarge,and Command+Option+Shift+< (Mac OS) or Ctrl+Alt+Shift+< (Windows) to reduce.
1 vote -
Searchable text
I would also like a feature i.e. text of indd files should be searchable without opening the indd file, and using its find and replace dialog box. i have hundereds of indd txt files. and everytime i need to search some thing in my indd files, so i have to open all the files and use the dialog box,
is there any option to do this without opening the indd file. like the search panel in finder, it finds in pdf, word, excel docs,1 vote -
Use Opt-click for "update all cross references"
In the links panel, opt-click on the update button updates all changed links. It also has a tool tip for doing so. I have been told opt-click is a 'standard' in many Adobe apps. But "update all cross references" is not so easily found. It requires to make sure no cross reference is selected and then click the update button. This is not intuitive and hard to find. Change to opt-click (with tooltip). Check for any other place that an update button exist and unify the UI in the same manner.
1 vote -
CMD/SHIFT scroll speed and direction shortcuts are now broken
It used to be that holding SHIFT and using the mouse wheel increased the scroll speed, and holding CMD changed scroll direction.
Now, holding SHIFT increases scroll speed direction AND changes scroll direction, while CMD still changes the scroll speed.
This means that, previous to the update, if you were scrolling veritcally down your document, you'd scroll normally, and could then hold shift to increase the speed. Whereas now, if you want to increase the scroll speed without changing direction you have to hold CMD as well.
IE - Previously used to work like this:
Scroll Wheel = Vertical Scroll
Scroll Wheel + CMD = Horizontal Scroll
Speed up Scroll = Add SHIFT (ie Horizontal scroll still requires CMD)Now it works like this:
Scroll Wheel = Vertical Scroll
Scroll Wheel + CMD = Horizontal Scroll
Speed up Vertical Scroll = Hold CMD SHIFT
Speed up Horizontal Scroll = Hold SHIFT (with no other shortcuts).This makes NO sense!
It used to be that holding SHIFT and using the mouse wheel increased the scroll speed, and holding CMD changed scroll direction.
Now, holding SHIFT increases scroll speed direction AND changes scroll direction, while CMD still changes the scroll speed.
This means that, previous to the update, if you were scrolling veritcally down your document, you'd scroll normally, and could then hold shift to increase the speed. Whereas now, if you want to increase the scroll speed without changing direction you have to hold CMD as well.
IE - Previously used to work like this:
Scroll Wheel = Vertical Scroll…
1 vote -
quad center
Quad centre
E.g.
left aligned text centre aligned text right aligned textPresently, you can do:
left aligned text right aligned text
but not centered text in the middleThere are various work-arounds to do this now but all are clumsy.
WordPerfect has done this for at least 35 years.1 vote -
addition of style override menu option
Please provide a menu option to override a style. Going to and from the associated style menu is time consuming and and would be easier if I could at least use keyboard navigation to access a menu option under the type, object or table menu headings to activate it.
1 vote -
Please recognize ".tab" file-extension as tab delimited text file (data-merge)
Please recognize ".tab" file-extension as tab delimited text file (data-merge)
Now i have to rename the fileextension to .txt everytime.
Not very handy when you update the datafile quite often.1 vote -
Reset option for object shift in flow text
When placing an object in flow text, for instance a small image, the object can be shifted up and down with the mouse pointer to adjust its position in relation to the text. That position is nothing that has a corresponding value in any toolbar so it can't be reset. Would be nice to have a reset button for it or use the text shift up/down value also for objects.
1 vote -
InDesign Scripting : Events On PageItems
Many elements of the page have the ability to subscribe to messages (events of change of such an item are especially interesting), but this does not work. Does the event system work only for UI, Application, and Document?
There are too few documents that describe events on page items ...
1 vote -
Place the close button at the top of all pop up menus (rather than the bottom)
When I open pop up menus in InDesign they are often larger than my screen (see attached pic), and as the close button is at the bottom of all menus, I am unable to click on the close button. I'm forced to change the resolution setting of my desktop in order to be able to view and access the close button, which is very annoying. A quick and easy fix would be to have the close button at the top of each menu instead.
1 vote -
View tab> Select View Side by Side> Synchronous Scrolling
Please add Synchronous Scrolling to Acrobat. We use PDFs to proof our InDesign documents. The Compare docs in Acrobat doesn't work because it eventually stop syncing and the pages are not side by side.
View tab> Select View Side by Side> Synchronous Scrolling
1 vote -
We need much more comprehensive word/character counts functionality
We need much better support for word counts than simply selecting some text or an active story and getting feedback on it through the info panel.
As others suggest, we need support for Books, entire documents, I want to know how many words are in tables, footnotes, how many words are duplicated from master pages, give me a breakdown of words by style/font/colour so that I can use these parameters to easily subtract them from a count.
Pretty much like Illustrator when nothing is selected can give you a breakdown of information document wide, and then specifics when you select objects. This is how the info panel needs to be updated so that if I select a bunch of text frames mixed with an assortment of other items, InDesign is smart enough to decipher and relay information relevant to what it is I have selected be that words, characters, lines, paragraphs through to even number of rows or columns, tables, images etc.. Then give me that as it applies to the whole document when I don't have anything selected.
If a feature like this would be too stressful on system responsiveness/useability then move the requested enhancements in the File info section from the flyout of the Info panel as the info there is pretty pants and could be made so much more informative
Swatches, Styles, Images (embedded versus linked), Pages, White space calculator to infer coverage of a page. The list could go one but you get the picture.
Let make it a bit more useful eh?
We need much better support for word counts than simply selecting some text or an active story and getting feedback on it through the info panel.
As others suggest, we need support for Books, entire documents, I want to know how many words are in tables, footnotes, how many words are duplicated from master pages, give me a breakdown of words by style/font/colour so that I can use these parameters to easily subtract them from a count.
Pretty much like Illustrator when nothing is selected can give you a breakdown of information document wide, and then specifics when you select…
1 vote -
Include Page Slug
I often have multiple sizes of graphics inside of one ID document and it would helpful to show the slug when sending a Share for Review link. I currently use the slug to identify and label each page (and size) and it would be nice to have that included for the reviewer to also identify each page/size.
If the slug isn't the best way to accomplish this, it would be great to have a label on the review for the name of each page and size
1 vote -
Option to set Paragraph border align to text frame edge
In the paragraph border options we can set the top edge, bottom edge and width to text based parameters but it would be useful to be able to set these to align to the text frame edge.
Especially useful when running multiple text frames up against one another in a loosely tabular format but when you don't actually want to be bound by the restrictions of a table.
1 vote -
Fix 'manual bookmark' position
I'd love the ability to fix the position of a manually created bookmark in relation to all the TOC bookmarks which are all in the same panel, so that they don't shift around every single time you update the TOC. It is frustrating to have to move them around in a 80+ page document.
Alternatively, would love to be able to easily stop a specific bookmark from appearing in the automated TOC but allowing it to appear in the interactive PDF.
Finally, I'd love the bookmark palette or interface to be bigger, it's a little painstaking to try to drag & drop them to correct places as the scrolling view has a mind of its own sometimes.
Thanks!
I'd love the ability to fix the position of a manually created bookmark in relation to all the TOC bookmarks which are all in the same panel, so that they don't shift around every single time you update the TOC. It is frustrating to have to move them around in a 80+ page document.
Alternatively, would love to be able to easily stop a specific bookmark from appearing in the automated TOC but allowing it to appear in the interactive PDF.
Finally, I'd love the bookmark palette or interface to be bigger, it's a little painstaking to try to drag…
1 vote
- Don't see your idea?