Adobe InDesign: Feature Requests
When entering a new feature request, please provide:
1. Description
2. Why is this valuable to you?
Thank you.
5234 results found
-
Pantone libraries for color bridge CMYK formulas do not match the published Pantone formulas.
InDesign team advised Adobe has their own conversion. That's unacceptable. Designers need the confidence that the color libraries are in fact what they are called in CS. Any time a project goes to press and does not meet expectations, a printer can simply say - those colors are not the correct pantones and leave the designer holding the bag. Yes we can manually enter the correct values. But, unless designers experience a project go wrong, they're probably trusting Adobe libraries to be what they're called in CS. Adobe needs to update the libraries, or delete them, or simply call them…
1 vote -
Dynamic Spelling Additions
Please provide option that highlights assumed words/names versus words that are clearly spelled incorrectly. Please have them appear differently. A highlight for one and a underline for the other.
1 vote -
Dynamic Spelling Additions
Please provide option that highlights assumed words/names versus words that are clearly spelled incorrectly. Please have them appear differently. A highlight for one and a underline for the other
1 vote -
Dynamic Spelling Additions
Hi there,
I've lost sleep over this one. So, I'd like to suggest a feature that would be a little more helpful in the future in regards to fixing erros in a document. Here's the problem. As, it happens regularly.
I am provided a document with many highlighted spelling revisions. In the "DynamicSpellingChange" image dynamic spelling highlights all the families last names in a document. And just underneath Victoria Tseng Paepcke, Helen's Neice is spelled wrong.
This is my human error. As I typed this in after sending a revised proof that was already incorrect because I was in a…
1 vote -
group images by page
we would like to have the option to show links or images grouped by page because we have some time same images in 60 pages and we then want to replace them only on specif pages. so instead of doing it one image at a time, we could then just replace the images based on pages.
1 vote -
Don't automatically change view/zoom when editing layer visibility of linked graphics
Editing the layer visibility of a linked graphic in InDesign causes the zoom level to be automatically adjusted to fit-to-page. This makes it difficult to see the preview image for small graphics that may be hard to see at the full page zoom level.
If any automatic zoom adjustment is to be made at all (which it should not) it should be to fit the graphic to the window so you can see what you are doing.
1 vote -
Please bring back Indesign CS6 feature of Footnote Leading to be at zero so that We can have inline footnotes.
Please bring back the Indesign CS6 feature of Footnote Leading can be made at zero so that We can have inline footnotes. (Multiple vertical footnotes can be made in the same line horizontally to save space). Please see the attached file as an example. Currently, all the CC Indesign versions by default put a space between footnotes vertically (Leading). No matter what it does not allow the multiple footnotes to be in the same line horizontally. That is like deleting a very useful feature and reducing the capabilities of Indesign for Publishing industry formatters like us.
1 vote -
Option to draw a text frame on top of another text frame
Making a new text frame on top of an existing text frame is something I very frequently need to do. However, as it is, for different reasons this simple process is needlessly cumbersome.
I have two suggested solutions (I have a dream that both could be implemented, and make a basic upgrade to my workflow):
Make the type tool able to draw a text frame on top of another text frame. Explanation: When hovering the type tool above an empty area, the tool turns into a text frame tool, as indicated by the cursor. However, when hovering above an existing…
1 vote -
snapping
I would like for InDesign to snap my objects to the grids and margins I made instead of to random spots right next to it, as seen in the image I attached. I work in a document for print, so it is not snapping to pixels or whatever.
It snaps to random stuff and every **** textbox or image is a ton of work. When making magazines at high speed this really slows me down so much that I want to look into other software to do the job as Adobe is clearly nog the right partner to do this.
…
1 vote -
Be able to access loaded place cursor.
When you place multiple images they are in the loaded place cursor until you place all of them. If you do not place all of them it is not possible to get back to the loaded cursor with the rest of the images.
Being able to access the loaded place cursor with remaining images either through a shortcut or interface would be great.
1 vote -
Be able to access loaded place cursor.
When you place multiple images they are in the loaded place cursor until you place all of them. If you do not place all of them it is not possible to get back to the loaded cursor with the rest of the images.
Being able to access the loaded place cursor with remaining images either through a shortcut or interface would be great.
1 vote -
Does Boot Camp Work on the M1 Macs?
Sadly, the short answer is no. It’s probably not what fans of the M1 chip want to hear but because Apple switched away from the Intel models to Apple silicon and decided to kill the Boot Camp assistant, the old way of running Windows on Macs is not possible.
There is a bit of method to perceived madness here. To take on Intel and create their own chip, Apple decided to go with the ARM chip instead of the Intel-created x86 architecture. It has been a while since Apple introduced ARM chips to power their phone and tablet range so…
1 vote -
Capacity to ignore external plug-in
Hi all.
I have a work made in Aquafadas (now Rakuten). The plug-in for digital publishing will not be developer again because the brand wil close the business. So, I switch the plug-in to another one (InPublishing) and everything goes fine on 2020. But with InDesign 2021 it seems to be impossible to work. InDesign 2021 made a ceck on files and it seems impossibile to add a file made with a plug-in that is not installed on a Book.
That's very stupid, because It seems that I cannot work with 2021 because the original plug-in is not installed. BTW…1 vote -
Avail of the Robinhood customer service facilities
Robinhood users can avail themselves of the Robinhood customer service facilities with their effective approach. They need to learn the methods through which they can be able to communicate to the service professional quickly. The trading platform seeks out the special management trick to be in safe mode. Since the online trade has created a ray of hope for the people in terms of making money. https://www.contactsupport-number.net/phone-number/robinhood/
1 vote -
Adjust scroll amount on zoom
Currently when scrolling with the mouse-wheel/trackpad etc, InDesign seems to apply the same amount of scrolling regardless of the level of zoom in the document. This means that a very small scroll gesture, when zoomed in close on a page, causes the document move too far, making scrolling and panning very difficult at high zoom levels.
It would be great if the scroll amount would scale with the level of zoom, so that a small scroll gesture used at a high level of magnification would only result in a small scroll/pan amount.
1 vote -
Share for review file management
Hi, I would like to be able to manage files I shared for review in bulk: sometimes I have a lot of files I want to delete at once, but I cannot find a way to do that (have to delete them seperately and click a confirm button again and again...) If this option already exists, please let me know where to find it!
1 vote -
Drop unit when clicking property fields
For example, if I click on Font Size when it says 10 pt, it should automatically drop the 'pt' before I start typing. Retyping the value is always faster than trying to move the insertion point and highlighting only the numbers to avoid getting an "invalid value" message because you accidentally typed over the 'p' in 'pt'. Else you have to always double-click the field, but sometimes that fails to highlight everything for one reason or another. There's no real use case for leaving the unit in the box when entering a value I've ever encountered.
1 vote -
Mention the layer at the bottom of the window or in the Control Panel
You have to open the Layer Panel to check what layer you're working on. It would be a time saver if the active layer is mentioned somewhere else in the UI.
1 vote -
Direct copy links informations out of the Info-Board.
Direct Copy any informations out of this board.
1 vote -
Indesign Lite, but different to the already suggested
Indesign comes with a lot of features you never use. Features like the absolutely annoying and nasty Creative Cloud and its client, the even nastier CCX, the constant updates which lose compatibility between almost every next version and the previous one, the CC library which doesn't work at all (it should host any kind of object, but it doesn't), InCopy. Remove all that and let us just use what we need.
1 vote
- Don't see your idea?