Adobe InDesign: Bugs
When filing a new bug, please provide:
- Version of Adobe InDesign, InCopy or InDesign Server
- Steps to reproduce the issues
- Expected result
- Actual result
- Test file, screenshot, video or GIF capturing the issue (optional)
6835 results found
-
インデザインの画面上に常に存在する黒ベタのバー
画像のように作業中常に黒ベタのバーのようなものがずっとあります。
スクロールしても一定の位置にずっとありパフォーマンスが落ちて困っています。（起動時によって下半分の画面の左右中央らへんにいつも出てきます。）
再起動してもあります。
これを見えなくする方法はありますか？
よろしくお願いします。1 vote -
Rulers exceeding text boundaries, only paragraph shading or offsets seem to be able to limit them
The issue is described in this thread (sample .INDD file link included in the thread to reproduce the issue):
The excess rulers that go beyond the text boundary can only be removed (or masked, not sure which is actually happening) with paragraph shading.
As a rule, rulers should not go beyond the text boundary, and they should adapt to the text boundary (if font size have been changed, or if other changes have been made that affect the layout).
But the green arrows show that in some cases the boundary is correct.
It shouldn't be necessary to add both…
1 vote -
Rulers exceeding text boundaries, only paragraph shading or offsets seem to be able to limit them
The issue is described in this thread (sample .INDD file link included in the thread to reproduce the issue):
The excess rulers that go beyond the text boundary can only be removed (or masked, not sure which is actually happening) with paragraph shading.
As a rule, rulers should not go beyond the text boundary, and they should adapt to the text boundary (if font size have been changed, or if other changes have been made that affect the layout).
But the green arrows show that in some cases the boundary is correct.
It shouldn't be necessary to add both…
1 vote -
17.4 x64 Popup Survey Spam
17.4 x64 When using InDesign, popup: "thnk u 4 using share 4 review; take a survey." Not sharing, advised by Manan Joshi: is bug, file bug accordingly, Now More surveys. Please stop.
1 vote -
Table border selector problem
Table border selector lines are extremely thin at minimal UI scaling, hard to select and see. In previous Indesign versions versions it was much thicker. Screenshot attached.
MacOS 12.5..1, iMac 27" 5K, InDesign 17.4.0.51
1 vote -
Bug: Conditional text not shown as underlined when text is marked otherwise
Version: Indesign 17.x on Windows 10
Problem: Sometimes text is being marked in bright yellow by Indesign. This is something related to character spacing and hyphenation and set. If that text is also set to be conditional, the underlines are not shown. In the attached picture you see it. This is a continuous conditional text.1 vote -
avoid incorrect sentence breaks
Hello, on your next in design update, I suggest an improvement that would be very useful for correct typographic formatting! For the formatting of a flagged text, it would be nice to be able to prevent line breaks before a two/three letter word, to avoid that the pronoun is separated from the subject (ex: "the" (line break) "house", to have "the house" on one line. I hope you will be able to add this feature, which I think is essential. Thanking you for your help
1 vote -
share for review comments are unmapped
my editors are able to add comments to a share for review pdf in a browser without choosing a tool. they highlight text and add a comment, click submit, and the comments come up as unmapped. i'm on InDesign 17.4.
i was able to replicate this problem myself by opening the share for review pdf in my browser (both chrome and safari) and adding comments without selecting a tool. there should be a bubble tool or something for general comments. as is, users believe they are leaving comments on specific words.
expected: users should not be able to highlight text…
1 vote -
Conditional text paste problem
I use conditional text quite a bit… it’s a really useful feature.
However, if you have to edit the text there is an issue (for me anyway). If you “type” new/replacement text everything is fine. But more often than not I am pasting text from a marked UP PDF or an email or Word file… when you paste, it automatically defaults to unconditional, even though what it is replacing is all a specific condition. Is that a bug? Or is it just me?
Latest InDesign, late 2015 27″ iMac Retina 40GB RAM, latest MacOS Monterey1 vote -
"Missing font" dialog design error
In the "Missing Fonts" dialog box, the "Skip" button (B: Überspringen) is clearly highlighted. So you might think that you activate this button with "Enter". Instead, pressing "Enter" opens the "Replace Fonts" (A: Schriften ersetzen…) dialog, which has a slightly bold border.
This is visually completely nonsensical and confusing.1 vote -
2nd print job doesn't print completely
IN Design 10.4.2. Every time I print a booklet the 2nd time, the left page of the middle spread leaves gaps or doesn't print at all. I have to Reprint the range that includes that page. I am not able to upload the file here. I get the message the file Transformation8.indd is not supported.
1 vote -
When exporting a Thai document to PDF, footnote numbering goes wrong after the ninth footnote.
When exporting a Thai document to PDF, footnote numbering goes wrong after the ninth footnote.
InDesign 17.4 (on Apple M1)
To reproduce,
- Create nine footnotes however.
- Create a new paragraph wholly in Thai (which you can do by copying something over from the Thai Wikipedia, or just the following text: ย่อหน้า.)
- Place a cursor behind some distinctly Thai character (i.e., a consonant or vowel, not a punctuation mark).
- Insert the tenth footnote.
- Write the tenth footnote wholly in Thai.
- Export the document to PDF
The footnote number (as a superscript) in the body should be 10, and the corresponding footnote…
1 vote -
17.4 hangs opening files
Updated to 17.4 to benefit from purported improvement on ID hang on files with missing fonts. Now opening any file causes a hang.
ID 17.4
OS 12.5.1Console posts "nwsockethandlesocketevent <private> Socket SO_ERROR [61: Connection refused]" message for ID (where it joins the steady stream of error messages for Illustrator)
1 vote -
CMYK JPG export does not preserve the correct dpi export information
To demonstrate this bug, I've made an A4 landscape document as shown in image 1.
If I export this to an RGB PNG using the settings in image 2, the image exports as expected and all figures - including the ppi - are correct as shown in image 3.
If I export this to a CMYK jpgs using the settings in image 4, the image exports but the expected ppi of 300 ppi is incorrect and it has exported at 72ppi, though the pixel dimensions are correct (shown in image 5).
If I export this to an RGB jpg using…1 vote -
When changing (only) the color in the character style the text is changing from place
When changing (only) the color in the character style the text is changing from place. Indesign version 16.4.2, MacOs Mojave 10.14.6
When I do this by hand there is no problem. For me this is a huge problem because it is the link color in my whole document.
I am a user of Indesign from the beginning (1.0). I looked and tryed many things and it was never a problem. Hope you can help!1 vote -
Nav bar size change ruins my web app layout
Adobe have recently made the Nav bar at the bottom of the Publish Online interface fatter, unfortunately for my company, this means a carefully crafted web-app now has the Nav bar covering the lower part of my menu. It also on some PO documents, stays popped-up for much longer than 5 seconds, sometimes on single page documents, up to 15 seconds.
Adobe say this is because they wanted to improve accessibility, but really they're messing with a space that shouldn't keep changing, as per the margin around PO documents they added earlier in the year. Improve the products - yes,…1 vote -
snippet not retaining font
As per the Adobe forum post here (https://community.adobe.com/t5/indesign-discussions/font-not-embedding-into-snippet/m-p/13153510#M489639) , I've added a form/text field into a snippet, but when placed the font used is replaced by Myriad... the font I want is a custom TTF. Is there a recognised issue here?
If I place the *.idms file with that TextBox formfield to the same document where I exported it from all is working good. But if I do a new document and place it there the font family definition reverts to Minion Pro. The style's name will remain. E.g. Semibold if I do this with your supplied font…
1 vote -
File Can't Export to PDF
I have a specific file that I cannot export to PDF. I simply get a Background Task Alert that says 'Failed to Export the PDF file.' This is the only file which gives me this problem, I'm able to export other files just fine. I am using PC, and other co-workers on Mac are able to Export the file just fine.
I'm unsure as to what the issue is because I am getting No Errors mentioned in my Preflight Panel, and the Background Task Alert isn't giving any sort of code associated with the error.
1 vote -
Indesign Documents placed in Indesign do not show used effect after reopening
… and also export "sometimes" the wrong rendering as PDF.
After reopening the saved File with the Placed Indesign-File it always displays in a wrong way! Thats quite new! look screenshot below
I also recognized that sometihing changed in handling with the effects in Indesign. Especially if I copy objects from Indesign to Photoshop (a thing i made over years without problems) .... the look as it was in Indesign changes unfortunally. The only solution is at the moment to export the parts as pic and open it than in Photoshop, to be save evrything is as wanted.
This tells…
1 vote -
Boards are not displaying
All I can see is a grey screen surrounded by my tools and panels, as though I had hidden my pages. My cursor works as normal, identifying objects and texts, and can even select and move them, but nothing is shown. Occasionally a pdf file will be visible as part of a glitch. I have tried updating my Mac, Indesign, and restarting both.
Version: Adobe InDesign 2022
Steps: opening any of my files
Result: empty screen1 vote
- Don't see your idea?