434 results found

1. links

   In InDesign 2026 21.2, when opening an .indd document in a package folder, the links cannot be found in the Links folder, even though it is in the correct location.
   Opening the .idml file in InDesign 2026 21.2 works.
   Opening the .idml file in InDesign 2025 20.5.2 works normaly, and saving the document as .indd from InDesign 2025 and then opening it in InDesign 2026 works again.
   This is therefore a serious bug in InDesign 2026.

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Inconsistent metadata display for Photoshop EPS vs TIFF in Links panel

   When placing raster images exported from Photoshop into InDesign, there is inconsistent metadata shown in the Links panel between TIFF and Photoshop EPS formats.

   Using the same source image exported as both TIFF and EPS (CMYK), InDesign displays full image metadata for the TIFF (including Actual PPI, Effective PPI, dimensions, ICC profile, and transparency), while the EPS only shows basic file information and omits all image-specific data.

   Since the EPS in this case is a raster image generated by Photoshop as supported natively by InDesign, it should be interpreted similarly to TIFF and expose the same metadata. I remember this being the case many years ago in older versions of Adobe InDesign.

   This inconsistency makes it difficult to verify image quality (e.g. resolution) and creates confusion in print workflows.

   When placing raster images exported from Photoshop into InDesign, there is inconsistent metadata shown in the Links panel between TIFF and Photoshop EPS formats.

   Using the same source image exported as both TIFF and EPS (CMYK), InDesign displays full image metadata for the TIFF (including Actual PPI, Effective PPI, dimensions, ICC profile, and transparency), while the EPS only shows basic file information and omits all image-specific data.

   Since the EPS in this case is a raster image generated by Photoshop as supported natively by InDesign, it should be interpreted similarly to TIFF and expose the same metadata. I remember this… more

   •  

   •  

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. grafik

   Hi,

   bei mir gibt es immer eine Anzeigefehler. Trotz neuen Rechner und Neuinstallation tritt dies auf.
   Eine Hilfslinie oder Seite verschiebt sich zu Teilen um einen minimalen Absatz. So ist eine richtige Ausrichtung nicht möglich. Außerdem wird der Text oft verpixelt angezeigt.
   Computer: Windows 11 25H2; Intel(R) Core(TM) i9-14900HX (2.20 GHz), Nvidia
   Indesign: Adobe in Design 21.2 x64, Normale Anzeige,

   •  

   •  

   •  

   •  

   •  

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. jpeg vs jpg

   1. InDesign (21.2) , Illustrator (30.2.1), Dropbox 243.4.6956, MacOS 15.7.4, M4 Macbook Pro Max
   2. Linked files with JPEG extensions within an Illustrator file (.ai), that are placed into an InDesign Document, initially show up, but then disappear if the Illustrator file is edited after being placed within an InDesign Document. 3/4. Linked JPEG files should appear in the InDesign file, but disappear.
   3. It appears as though saving the JPEG file as a JPG file solves the issue, but this has never been an issue in the past. It's a problem with 100's of legacy InDesign Documents if i need to go back and resave as jpg files.

   1. InDesign (21.2) , Illustrator (30.2.1), Dropbox 243.4.6956, MacOS 15.7.4, M4 Macbook Pro Max
   2. Linked files with JPEG extensions within an Illustrator file (.ai), that are placed into an InDesign Document, initially show up, but then disappear if the Illustrator file is edited after being placed within an InDesign Document. 3/4. Linked JPEG files should appear in the InDesign file, but disappear.
   3. It appears as though saving the JPEG file as a JPG file solves the issue, but this has never been an issue in the past. It's a problem with 100's of legacy InDesign Documents if i need to go… more
   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Content-Aware Fit produces poor crops / bad fit

   In these “AI times,” how can “Content-Aware Fit” be so extremely bad at cropping images like these? It hasn’t improved between CC2019 and CC2026.

   The feature could be very useful and does an okay job on many images, but when the results are this poor, it’s hard to use it at all in automated workflows.

   I often get complaints that images that absolutely don’t need much cropping end up being cropped unnecessarily.

   Is this something Adobe has in their backlog or roadmap to fix?

   •  

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. InDesing 2026 - Document assembly issue

   When I try to assemble my InDesign document, an error message appears stating that it is impossible to package the document or link the necessary files. However, no links are broken and the path to the company server is working. This is very problematic when I have a multi-page document…

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Linked image within illustrator file not appearing when placed in indesign

   Using:
   InDesign 21.1
   Link created in Illustrator 30.2.1

   I have a map created in Illustrator with a background (flattened) tiff which displays fine in Illustrator. Once placed into InDD, the tiff won't appear (layer is ON and printing) and doesn't get included in exports (thus eliminating a rendering issue of any kind).
   This has happened on 2 separate files but is fine in others with the same set-up.
   On occasion the tiff will reappear...
   This is a recent 'development' in past 2 weeks.

   •  

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. graphic frame anchor proxy not visible

   Graphic frame does not include an anchor proxy symbol (unanchored) or a small blue dot (anchored). Screen mode is normal, show hidden characters is enabled, frame is not on a master page.

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. BUG: InDesign 2025–2026 forces pasted Illustrator vectors to embedded EPS

   Description:
   InDesign 2025–2026 frequently forces pasted Illustrator vector artwork to be placed as embedded EPS, even when the artwork is extremely simple (few paths, no effects, no transparency).

   When pasting from Illustrator, the following warning appears:
   “This command would create a large number of page items and would severely degrade performance. Data will be placed as embedded EPS.”

   After confirming the warning, the pasted object is no longer editable:
   - Ungroup is unavailable
   - Individual vector paths cannot be selected
   - Fill and stroke cannot be edited
   - The object cannot be used as an image frame

   Steps to Reproduce:
   1. Create a simple vector object in Adobe Illustrator (2–3 shapes, no effects).
   2. Copy the object.
   3. Paste into InDesign 2025 or 2026.
   4. The performance warning appears and the object is embedded as EPS.

   Expected Result:
   The pasted artwork should be converted into native, editable InDesign vector paths, as in earlier InDesign versions.

   Actual Result:
   InDesign forces the artwork to be placed as embedded EPS, making it non-editable.

   Additional Notes:
   - Occurs even when “Prefer PDF When Pasting” is disabled.
   - Occurs even when “Copy PDF to Clipboard” is enabled.
   - Clipboard settings are correctly configured.
   - The same artwork pastes correctly as editable vectors in earlier InDesign versions.

   This behavior worked correctly in earlier versions of InDesign and appears to be a regression.

   Description:
   InDesign 2025–2026 frequently forces pasted Illustrator vector artwork to be placed as embedded EPS, even when the artwork is extremely simple (few paths, no effects, no transparency).

   When pasting from Illustrator, the following warning appears:
   “This command would create a large number of page items and would severely degrade performance. Data will be placed as embedded EPS.”

   After confirming the warning, the pasted object is no longer editable:
   - Ungroup is unavailable
   - Individual vector paths cannot be selected
   - Fill and stroke cannot be edited
   - The object cannot be used as an image frame

   Steps to Reproduce:… more

   •  

   •  

   •  

   •  

   •  

   1 vote

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. Linked images are not loading after Mac OS upgrade to Tahoe 26.2

    Linked images are coming up distorted/warped after upgrading my Mac's OS to Tahoe 26.2. Can be corrected by manually relinking all the images, but what a pain. Screenshot example included.

    •  

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. Can't Resize Vertical or Horizontal Line If Width Is Zero. Angled Lines with Zero Width Can Be Resized

    This happens when I create a horizontal or vertical line using the "shift" key, then try to resize the line using the selection tool and mouse.

    This issue is present on InDesign 21.1 x64. My operating system is Windows 11. I have no InDesign Plugins installed.

    I have experienced this issue on two different computers. The problem is not present on older versions of InDesign.

    PROBLEM: When resizing a horizontal or vertical line, such as is created when holding down the 'shift' key, and that line has zero width, the line visually appears to change, then snaps back to its original length when the mouse is released.

    If I attempt to change the length of the line using the "L:" box in the toolbar, a pop-up dialog box appears that says "Unable to set bounding box."

    EXPECTED BEHAVIOR: The line changes size.

    EXTRA INFO THAT MIGHT HELP:

    If I create an angled zero-width line, it is resizable as expected, BUT if I rotate a horizontal or vertical zero width line, then attempt to resize, the resize fails with the same behavior.

    If I change the width of the line to anything other than zero, I can resize the line as expected in all cases.

    If I create a horizontal or vertical line with a width other than zero, I can resize the line, but if I change the width to zero, the line won't resize as described above.

    It doesn't matter if I check or uncheck the "Constrain Proportions for Width and Height" toggle.

    It doesn't matter if I check or uncheck the "Constrain Proportions for scaling" toggle.

    If I hold down "shift" while resizing, the problem still exists.

    If I hold down "ctrl" I can scale the line, which works for resizing

    If I hold down "ctrl+shift" I can scale the line with fixed proportions, which does let me resize.

    This get really weird when I try to resize a group of objects that contains zero width line. Sometime the resize fails, sometimes some part of the group change, but never the line. I don't have a consistent set of behaviors that I can describe when it comes to grouping.

    This happens when I create a horizontal or vertical line using the "shift" key, then try to resize the line using the selection tool and mouse.

    This issue is present on InDesign 21.1 x64. My operating system is Windows 11. I have no InDesign Plugins installed.

    I have experienced this issue on two different computers. The problem is not present on older versions of InDesign.

    PROBLEM: When resizing a horizontal or vertical line, such as is created when holding down the 'shift' key, and that line has zero width, the line visually appears to change, then snaps back to its… more

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. I am unable to see any images I place unless I preview the file (Shift W). A grey box with an X occurs.

    •  

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. error with image display

    in a large brochure with a large number of images, some of them are not displayed in "Display Performsnce - Typical" mode - instead of the image, only a rectangle is visible. Moreover, in the "High quality display" mode, these images appear, and those that were displayed in the Typical mode, on the contrary, disappear. This all happens in the "normal" screen mode. In the preview screen mode, everything is displayed. (Display via the GPU is set)

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. copy something with a shadow from one document moves the shadows randomly

    in the version 21.0 of Indesign when you copy something with a shadow from one document into another and moves it the shadows move to random positions. Workaround: You need to select them manually deactivate and activate them to get them back at the right position.

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Need More Info  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    Please send the following information to sharewithID@adobe.com :

    • Reproducible Steps – What were you doing when the issue occurred?
    • Video recording of the issue
    • Is(Are) the issue related to a specific document(s)/asset(s)? If yes, could you provide us with the document(s)/asset(s)? Please package the entire document (To package the document, choose File → Package…)

    —

    Adobe InDesign Team

15. placing illustrator images

    One of my students was having an issue when placing a native AI file inside InDesign 21.0 that the graphics became distorted. His image was not very complex. He had a some columns and rows of circles that display and print in a totally different way then they are in the Illustrator file, and some white shapes he had on top of a solid color area disappeared. Everything is fine in Indesign when it is first placed, but if he goes back into Illustrator makes a change and then updates the modified link, that is when the change occurs. The only work around we found was saving the Illustrator file as an older version of Illustrator and then using that file in InDesign. I've never seen anything like this.

    One of my students was having an issue when placing a native AI file inside InDesign 21.0 that the graphics became distorted. His image was not very complex. He had a some columns and rows of circles that display and print in a totally different way then they are in the Illustrator file, and some white shapes he had on top of a solid color area disappeared. Everything is fine in Indesign when it is first placed, but if he goes back into Illustrator makes a change and then updates the modified link, that is when the change occurs. The… more

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Need More Info  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    Please send the following information to sharewithID@adobe.com :

    • Reproducible Steps – What were you doing when the issue occurred?
    • Video recording of the issue
    • Is(Are) the issue related to a specific document(s)/asset(s)? If yes, could you provide us with the document(s)/asset(s)? Please package the entire document (To package the document, choose File → Package…)

    —

    Adobe InDesign Team

16. Shadow

    ID 2026, 21.0 x 64:
    When I move a field/object, the drop shadow is partly not moved to the same place. It appears in different places. See screenshot attached. The text field is grouped, the QR code is not.
    This ist new with ID 2026. Thank you

    •  

    •  

    •  

    4 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    Need More Info  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    Please send the following information to sharewithID@adobe.com :

    • Reproducible Steps – What were you doing when the issue occurred?
    • Video recording of the issue
    • Is(Are) the issue related to a specific document(s)/asset(s)? If yes, could you provide us with the document(s)/asset(s)? Please package the entire document (To package the document, choose File → Package…)

    —

    Adobe InDesign Team

17. [ID-4271267] Ungrouping objects causes the selection to be lost

    Version: Indesign 21.0
    Steps to reproduce: group some objects, then ungroup
    Expected result: keep objects individually selected
    Actual result: selection lost

    •  

    11 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    FIXED  ·  AdminSanyam Talwar (Senior Lead Software Engineer, Adobe InDesign) responded

    The fix of the issue is now available in the latest InDesign 2026(v21.0.1.006). We recommend you upgrade to the latest version for the fix.

    If you are unable to see the update, go to the Creative Cloud application, click on the context menu on the top right, and click on Check for App Updates.

    —

    Adobe InDesign Team

18. Certain images (for example JPG, PNG) cause a strange effect across the entire page. The effect appears as blackening of the letters and a c

    •  

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. Duplicated layers when placing Illustrator files

    When an Illustrator file is placed in InDesign, the tab with Layer options shows multiple versions of the same layers. The number of layers is multiplied by the number of artboards.

    I see this issue with newly created Illustrator files. The older .ai files are placed correctly.

    InDesign 20.5
    Illustrator 29.8.1
    macOS

    • 

    11 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    7 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. GenAI Image location

    GenAI Images are automatically saved to the User's iCloud Documents folder. This causes a major issue if projects are shared with other users in that the GenAI Images may not get copied across, resulting in broken links.
    Another issue this creates is that if the User's iCloud storage is full, new images will not be created.
    There needs to be an option, either in the Preferences or the Links panel, for users to select where GenAI Images are stored.
    Please implement this.

    4 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Graphics/Images/Assets  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating