368 results found

1. Fond de page en gabarit qui se transforme en bloc image dans les pages du document lorsqu'on importe des images dans ces pages.

   Sous InDesign 2017.1 build 12.1.0.56.

   Je dois créer 8 panneaux différents comportant 1 logo blanc par panneau sur fond noir.

   Pour créer mon fond noir et l'appliquer aux 8 pages de mon document en même temps, j'utilise un bloc vide avec couleur de remplissage noir sur le gabarit A (par défaut à la création du document). Je m'attends donc, comme d'habitude, à ce que ce fond soit en quelque sorte verrouillé sur les 8 pages de mon document et que je ne puisse intervenir dessus qu'en me positionnant sur mon gabarit.

   Ensuite j'importe tous mes 8 logos en PDF que je place sur chaque page de mon document. Là, au lieu d'avoir, comme d'habitude, un nouveau bloc image qui se créé pour chaque logo, le fond de chaque page (qui pourtant est sensé être non modifiable lorsque je suis sur les pages de mon document), se transforme en un bloc image avec un fond noir et le logo en plein milieu. D'ailleurs lorsque je place mes logo à l'aide du clic souris, je remarque que le curseur de la souris m'indique comme quoi l'élément importé va être placé dans un bloc (curseur logo Acrobat avec les parenthèses).

   Si ensuite je modifie mon gabarit aucune modification ne sera prise en compte, car le fond de page sur la gabarit s'est transformé en un bloc image indépendant sur chaque page. Pourtant chaque page a encore le petit A sur sa vignette, signe que le gabarit est toujours appliqué.

   C'est un peu compliqué à expliquer et je n'ai aucun moyen de vous faire une animation. Prendre un screenshot serait inutile aussi car cela ne vous montrerait pas le souci. J'espère donc que mes explications suffiront.

   Cordialement,
   Joffrey
   COPY FLASH

   Sous InDesign 2017.1 build 12.1.0.56.

   Je dois créer 8 panneaux différents comportant 1 logo blanc par panneau sur fond noir.

   Pour créer mon fond noir et l'appliquer aux 8 pages de mon document en même temps, j'utilise un bloc vide avec couleur de remplissage noir sur le gabarit A (par défaut à la création du document). Je m'attends donc, comme d'habitude, à ce que ce fond soit en quelque sorte verrouillé sur les 8 pages de mon document et que je ne puisse intervenir dessus qu'en me positionnant sur mon gabarit.

   Ensuite j'importe tous mes 8 logos en PDF que… more

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

2. Blocked into portrait mode

   My computer's touchscreen and, accidentally touching The screen, I pressed something that made all my pages go into portrait mode and I can't find a way to get them back into landscape mode. Please help! I need to finish my portfolio for tomorrow and this bug is really disturbing my work! I've already tried changing the orientation by going into file>documents setup, but the settings say my pages are already in landscape mode, even though they clearly aren't!

   •  

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

3. Inversion dans un menu

   Indesign version 2017.1 (version française) : Pour autoriser la réorganisation des pages il faut décocher dans le menu "autoriser la réorganisation des pages" (au lieu de le cocher).

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

4. New Format in InDesign CC

   Beim Anlegen eines neuen Formats kann man rechts oben im Optionsmenu die genauen Masse eingeben. Mit der TAB-Taste kommt man dann ja immer eine Option weiter. In Adobe Illustator und in Photoshop funktioniert das in der gewünschten Reihenfolge, im InDesign (deutsche Version) nicht: da folgt nach der Breitenangabe bei betätigter TAB-Taste die Frage nach der Einheit (z.B. mm etc.) und dann (nach weitere TAB-Taste) erst die zweite Grösse des Dokuments (also die Höhenangabe). Eigentlich sollte die logische Reihenfolge ja lauten: Breite > Höhe > Einheit.

   In english:
   When creating a new format, you can enter the exact mass in the upper right corner of the Options menu. With the TAB-key you always get an option. In Adobe Illustator and in Photoshop, this does not work in the desired order, in InDesign (German version): since the width is indicated by the TAB key pressed, the question is about the unit (eg mm etc.) and then (after another TAB key) ) Only the second size of the document (ie the height). Actually, the logical order should be yes: Width> Height> Unit.

   Beim Anlegen eines neuen Formats kann man rechts oben im Optionsmenu die genauen Masse eingeben. Mit der TAB-Taste kommt man dann ja immer eine Option weiter. In Adobe Illustator und in Photoshop funktioniert das in der gewünschten Reihenfolge, im InDesign (deutsche Version) nicht: da folgt nach der Breitenangabe bei betätigter TAB-Taste die Frage nach der Einheit (z.B. mm etc.) und dann (nach weitere TAB-Taste) erst die zweite Grösse des Dokuments (also die Höhenangabe). Eigentlich sollte die logische Reihenfolge ja lauten: Breite > Höhe > Einheit.

   In english:
   When creating a new format, you can enter the exact mass in the… more

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

5. Enable Layout Adjustment Fails

   After Enabling Layout Adjustment, then changing the page size, I get an error message that reads "Internal error communicating with AI rulebase. Layout adjustment could not be performed."

   The document page size does in fact change, but pages in spreads actually overlap. Rulers at top of page do not show correct page size except on single pages (for instance, the first and last page of a facing-pages document).

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

6. InDesign Just Doesn't Work

   In a brand new file with 300 pages, tried placing a 100-page Word file numerous times, and it just wouldn't work. After a certain number of pages, the text would just stop. Sometimes, it would think that there was more text that I could place on the next page frame, and when I'd do those steps, it would just either create another blank frame, or pile multiple new frames of text on a single page. This is basic functionality that should be bulletproof, and it isn't. (For reference, I'm a long-time tech author who even taught PageMaker to clients in the late 1980s, so please don't dunk on my skill set.)

   Not to mention that there's too little control over things you can fix in Word, like footnote numbering, no support for multi-level list numbering (like headings commonly found in academic documents), and more.

   I just wasted 15+ hours of my time trying to work around these issues on a publishing project, and I'm punting and going back to Word. Because Word actually works.

   In a brand new file with 300 pages, tried placing a 100-page Word file numerous times, and it just wouldn't work. After a certain number of pages, the text would just stop. Sometimes, it would think that there was more text that I could place on the next page frame, and when I'd do those steps, it would just either create another blank frame, or pile multiple new frames of text on a single page. This is basic functionality that should be bulletproof, and it isn't. (For reference, I'm a long-time tech author who even taught PageMaker to clients in… more

   0 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

7. My text does not reach the end of the page and skips to the next page. I've tried several ways and I can't solve this problem. It is a 600-p
   0 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

8. Speech note bar for oral presentation

   I propuse a speech bar (under each pages) to write his speech for an oral presentation. It can be really usefull when you prepare a diaporama for a presentation and know what say.

   When you finished your diaporama document, you can directly print all your speech separetly & begin to prepare oral.

   0 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Document/Pages  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close